Drying Light, Cooling Light, Full Tank Light

11 “Drying” Light

This light indicates that the machine is performing the drying phase.

This light indicates that the appliance is in the cooling phase. At the end of drying, there is a 10 minute cooling phase to cool the laundry.

If light or is flashing, this means that the Start Button needs to be pressed again for the programme to resume.

This light flashes at the end of the cooling phase and during the anti-creasing phase together with light .

This light flashes when the water reservoir is full. The reservoir can also be emptied during a programme.

In this case, after having fitted back in place, the start button must be pressed again for the programme to resume.

It allows you to select electronically controlled or time controlled drying.

Turn the dial to the required programme or time.

To cancel a programme which is running, turn the programme selector dial to “0” .

At the end of drying, turn the selector dial to “0” before removing the laundry.

These operate by means of dampness sensors.

All you have to do is to set the selector dial for the programme required and the laundry will be dried to the selected degree of dryness.

They can be used to finish off drying if necessary. Select the 60 minute programme for cottons or the 30 minute programme for synthetics.