Operating Sequence

Before using your tumble dryer for the first time, we recommend you place a few damp cloths inside the appliance and dry for approximately 30 minutes. There may be dust inside a brand new tumble dryer.

4. Select the required options

Depress Buzzer Off and/or Low Temp. Button, if you have to dry particularly delicate items.

1. Load the laundry

Open the door by pressing the relevant button. Load the items one at a time, shaking them out loosely and close the door.

Please check the laundry does not get caught between the door and filter.

P0871

2. Switch the machine on

Press the ON-OFF Button : the mains-on light comes on.

ON-OFF

P0045S

3.Select the drying time or the drying programme

Turn the selector dial to the desired programme or time.

M0027S

LOW BUZZER

TEMP. OFF

5. Start the machine

Depress START button for 1 second, the machine

starts operating and the drying light comes on.

To change a programme already in progress, turn the selector dial to “0”, select the new programme and then depress START button.

START

P0918S

Important!

If the drying programme has to be stopped before it reaches the end, we recommend that you turn the

programme selector dial to position (cooling) and wait until the end of this phase before removing the laundry. This will avoid a build-up of heat inside the appliance.

6. When drying is completed

The machine stops automatically. The control lights

and are flashing.

Turn the selector dial to “0”, the control lights go out. Release ON-OFF Button (the mains-ON light goes out) and immediately remove the laundry.