4SPIN Speed Button, Half Power | Zanussi ZDC 5375 W instruction

If you open the door during a programme, in order to restart the programme you must press the Start/Pause button again after having closed the door. The icon appears on the display above the relative door button.

4SPIN SPEED Button

Press this button repeatedly until the value shown on the display matches the speed the laundry items were originally spun in your washing machine.

Depending on the type of laundry the spin speeds are the following:

-COTTONS: ........800-900-1000-1100-1200-1300 1400 1500-1600 rpm.

-SYNTHETICS: ..800-900-1000 rpm.

-JUMPERS (BABY DRY): 800-900-1000-1100-1200 rpm.

If you do not know the exact laundry spin speed you can choose blank (no value on the display). The tumble dryer will dry the laundry using a default factory drying cycle.

Using this option you could decrease the drying cycle time, saving energy.

If you have selected a time controlled programme

(60 min. or 30 min.) you could not use this option because it has been selected a fixed time of drying. If you try to press this button a warning message «Selection error» appears in the display.

5 OPTION, CHANGE and EXIT Buttons

Option button allows you to move through the option icons.

Half Power				10.55
No
Door	Spin	Options	Change	Exit

Change button allows you to select/change the status of the different icons.

Half Power				10.55
Yes
Door	Spin	Options	Change	Exit

Exit button allows you to return to the previous selection.

Cotton extra				08.30
Cycle end at				10.55
	1200
Door	Spin	Options	Change	Exit

Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before pressing the START/PAUSE button.

By depressing the «Option» button, all the symbol icons, allowed for the selected programme, will appear in the display.

The first option (Half Power) will start flashing. Its name and status will appear on the display.

If you want to change the option status, press «Change» button. A line will appear below the selected icon, indicating that the option is set.

To select the other options press again the «Option» button and proceed as before.

Once you have completed the selection of the options, press the «Exit» button, the selected icons will remain fixed on the display.

Note: To modify the already chosen option selections, repeat the previous procedure.

Half Power

Selecting this option allows drying to be performed at a lower temperature, for delicate items.

The corresponding icon appears on the display during set up mode and the drying cycle.

A dash is shown under the relative icon to indicate that the option has been selected.

This option can also be used for time controlled drying.

This option cannot be selected with Quick Dry .