Zanussi ZDC 67550W user manual Something not working electrolux

125987350.qxp 2007-01-09 15:02 Page 21

something not working electrolux 21

Malfunction	Possible cause	Solution
When pressing a button,	● Washing protection.	● Turn the programme knob
	After the start of the pro-
the corresponding button		to OFF. Set the
	gramme, the option can no
flashes several times.		programme again
	longer be set.
Programme inactive,	● Condensation tank is full.	● Empty condensation tank,
light illumina-		then start programme with
ted.:		START/PAUSE button.
	● Not enough washing	● Select time programme or
Drying cycle ends shortly	loaded
		higher drying level (e.g.
after programme starts.	or washing loaded is too
		EXTRA DRY instead of
END light illuminated.	dry for selected program-
		CUPBOARD).
	me.
	● Lint filter clogged.	● Clean lint filter
	● Heat exchanger clogged	● Clean heat exchanger.
Drying cycle lasts an	with lint.
unusually long time.		● DELICATE is only suitable
Note:	● DELICATE button
		for use with loads of up to
After around 5 hours the	pressed and load volume
		3 kg!
drying cycle ends automa-	too big.
tically (see „Drying cycle		● Reduce load volume.
complete“)	● Load volume too big.
	● Laundry insufficiently	● Laundry must be
		adequately pre-drained.
	predrained.

GB