Zanussi ZDC 5350 W manual Permanent connection

Page 19

125992691.qxd 26/05/2004 11:13 Pagina 19

Should the plug need to be replaced for any reason, proceed as described below. The wires in the mains lead are coloured in accordance with the following code:

Green and Yellow

- Earth

Blue

- Neutral

Brown

- Live

GREEN & YELLOW

E

 

13 A

N

L

 

BROWN

BLUE

 

CORD CLAMP

P1041

 

The wire coloured green and yellow must be connected to the terminal marked with the letter «E» or by the earth symbol or coloured green and yellow.

The wire coloured blue must be connected to the terminal «N» or coloured black.

The wire coloured brown must be connected to the terminal marked «L» or coloured red.

Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.

WARNING:

A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard.

Ensure that the cut off plug is disposed of safely.

Permanent connection

In the case of permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3mm between the switch contacts and of a type suitable for the required load in compliance with the current electrical regulations.

The switch must not break the yellow and green earth cable at any point.

Image 19
Contents Tumble Dryer Use Important Safety InformationInstallation Child SafetyContents Interest Environment Your New Tumble DryerDescription of the Appliance Energy saving tipsControl Panel End of programme Delay Start buttonDelayed start Duration of selected programme8START/PAUSE button Indicator LightsLoad Programme ChartType of laundry Drying time Max-load Programme CoolingModifying the programme Operating SequenceDo not use the tumble dryer to dry the following Hints & Tips on DryingCare Labels you may find on your laundry Do not overload the applianceCleaning the filters Maintenance and CleaningExternal cleaning Cleaning the doorCleaning the air intake grill Cleaning the drumEmptying the water reservoir Something Not Working SL1 1DZ Service & Spare Parts0870 5 Customer Care DepartmentEuropean guarantee Guarantee ConditionsExclusions Technical Specifications Installation InstructionsAdjusting the level of conductivity Adjusting the level of conductivityProcedure Memorising the new settingDoor reversal Stacking kit optional accessoryUnpacking PositioningPermanent connection From the Electrolux Group. The world’s No choice