125992691.qxd 26/05/2004 17:51 Pagina 7
•Incorrect option selection
If you select an option that is not compatible with the programme you have selected, the display shows Err (error).
This code will reappear during the execution of the programme if you press one of the option buttons or turn the programme selector.
If you press the Start/Pause button and the door or the small door, situated at the lower part of the cabinet, is opened, the «Err» code will reappear again on the display.
•Alarm code
In the case of a functional problem, the display shows an alarm code (e.g. E21). See page 13 for more detailed information.
E21
8START/PAUSE button
Press this button to start the dryer after having selected the programme and the options.
The relevant light will stop flashing. If you have chosen a delayed start, the machine will begin the countdown.
If the door of the appliance or the small door at the bottom is opened while the programme is running, this button must be pressed again after closing the door in order to restart the programme from the point at which it was interrupted.
This button must also be depressed after a power failure and after having
In both cases the light of the Start/Pause button flashes to remind you that the start button needs to be pressed again.
9 Indicator Lights
These lights indicate the following functions:
“DRYING” light
This light indicates that the appliance is in the drying phase.
“COOLING” light
This light indicates that the appliance is in the cooling phase. At the end of drying, there is a 10 minute cooling phase to cool the laundry.
“END” light
This light is on at the end of the cooling phase, during the
“CLOGGED FILTERS” light
This light illuminates at the end of the programme to remind you that the filters must be cleaned.
“FULL TANK” light
This light comes on at the end of the programme to remind you that the water reservoir must be emptied. If this light illuminates during a programme this means that the water reservoir is full. The buzzer sounds, the programme stops, the light of the Start/Pause button flashes.
“CLOGGED CONDENSER” light
It comes on every 80 cycles to remind you that the condenser must be cleaned.
7