Operating Sequence

Before using your tumble dryer for the first time, we recommend to place a few damp cloths inside the appliance and dry for approximately 30 minutes. There may be dust inside a brand new tumble dryer.

1. Load the laundry

Open the door by pressing on the left side as per picture.

Load the items one at a time, shaking them out loosely and close the door.

Please check the laundry does not get caught between the door and filter.

4. Select the required options

Depress Buzzer Off and/or Low Temp. Button, if you have to dry particularly delicate items.

P1104

P1108

5. Start the machine

Depress START button for 2 seconds, the machine starts operating and the drying light comes on.

2. Switch the machine on

Press the ON-OFF Button : the mains-on light comes on.

ON-OFF

T0001S

3.Select the drying time or the drying programme

Turn the selector dial to the desired programme or time.

M0045S

To change a programme already in progress, turn the selector dial to “0”, select the new programme and then depress START button.

Important!

If the drying programme has to be stopped before it reaches the end, we recommend that you turn the programme selector dial to position (cooling) and wait until the end of this phase before removing the laundry. This will avoid a build-up of heat inside the appliance.

6. When drying is completed

The machine stops automatically. The control light

is flashing.

Turn the selector dial to “0”, the control light goes out.

Release ON-OFF Button (the mains-ON light goes out) and immediately remove the laundry.