Haier HK1400TXVE/ME Operational Functions, Hints for Saving Energy, Setting washing temperature

Page 8

Operational Functions

.

 

 

 

 

 

/

 

 

Tamp

Speed

 

 

 

 

 

 

Easy lroning Delay Timer

Prewash

Extra Rinse

6Kg Wash

Load

ON/OFF

/

 

 

 

 

 

$Ironing-free button Press this button, the laundry will be fluffed up at the end of the spinning cycle to reduce wrinkles.

B:Delay button

Press the Delay button before the program is started if necessary. Each press of the Delay button, the delay time will increase one hour (the regulating range is from the current setting to 24 hours). After the delay time is changed, press the Start button to activate the delay function.

Note: The delay time must be longer than the program time; otherwise, the washing machine will start the wash program directly.

C:Pre-wash button

Press this button, the washing machine will automatically start a prewash cycle during execution of a washing program.

D: Extra rinsing button

Press this button, the washing machine will run andditional rinsing cycle to further clean your clothes.

E: 6kg button

Press this button, the 6kg washing mode will be activated.(Only used in cotton and synthetic program)

F: Washing load button

Press this button, 3 load levels of " " (0-1.5kg), " " (1.5-3kg) and " " (3-5kg) will appear on the screen for manual selection before water is filled. After the load is set, the water content will be automatically adjusted.

G: Power button

Press this button to switch on the washing machine; press it again to switch the machine off.

Hints for Saving Energy

4. Setting washing temperature

Press the temperature button until "_ _ oC" is displayed if heating is not needed; otherwise, select an appropriate temperature as required (refer to the "Guide to Operational Program Selection").

5. Function selecting button

Select functions as required (refer to the "Operational Functions" section).

6. Washing

Press the Start / Pause button, the indicator at the upper left corner of the button will blink and the washing machine starts operation.

7. Finish

The washing machine will stop operation automatically when a wash cycle ends. The "End" sign will appear. Open the door and take out the laundry. Then turn off the tap and unplug the power cable.

Hints for saving energy

During operation

1.Collect clothes for one full wash load.

2.Do not overload the washing machine.

3.Pre-wash heavily soiled clothes.

4.Reduce the amount of detergent or choose standard or delicate wash programs for slightly soiled clothes.

5. Choose a proper washing temperature. Only exceed 60 for heavily soiled clothes.

6.Do not use more detergent than required.

7.Softening agent makes clothes feel softer and easier to iron.





 

 

 

 

 

 

 

 

Image 8
Contents Table of Contents Name of Parts Ing agent do not use flammable spray in close Vicinity to the washing machine do not removeWiring Circuit Matters Needing AttentionPower supply On the top of the washing machine MaterialsDuring the wash cycle Or bras, into a washing bag or a pillowTroubleshooting InstallationAdjusting the washing machine Dismantle the packing bolts as shown in FigPage Hints for Saving Energy Setting washing temperatureOperational Functions Load Reference Open the door, put in the laundry piece by pieceClose the door tightly Program Description Table

HK1400TXVE/ME, HK1000TXVE/ME, HK1600TXVE/ME, HK800TXVE/ME, HK1200TXVE/ME specifications

Haier has established itself as a trusted name in the home appliance industry, offering a wide range of high-quality products designed to enhance the living experience. Among their impressive lineup, the HK1200TXVE/ME, HK800TXVE/ME, HK1600TXVE/ME, HK1000TXVE/ME, and HK1400TXVE/ME air conditioners stand out as exemplary models that cater to diverse consumer needs.

These air conditioners are equipped with advanced inverter technology, ensuring energy efficiency and reduced noise levels during operation. The inverter compressor adjusts its speed according to the required cooling load, resulting in minimal energy consumption while maintaining optimal comfort. This technology not only lowers electricity bills but also extends the lifespan of the unit.

Haier's air conditioners boast a sleek and modern design, making them an appealing addition to any interior space. The spacious indoor units feature an easy-to-use interface with a digital LED display, allowing users to control temperatures and settings effortlessly. Remote control functionality is standard across all models, ensuring convenience and ease of use from any spot in the room.

Smart technology integration is a key feature of the HK series. These models support Wi-Fi connectivity, enabling users to control their air conditioning units from their smartphones through a dedicated app. This capability provides the flexibility to adjust settings remotely, pre-cool or pre-heat spaces before arriving home, and even schedule operation times for enhanced energy management.

The HK series also prioritizes air quality and comfort. With multifunctional air purification filters, these air conditioners effectively remove impurities and allergens from the air, creating a healthier indoor environment. The models feature multiple cooling modes, offering personalized comfort settings based on user preference, whether for a cool breeze in the summer or gentle heating in the winter.

In terms of capacity, the Haier models cater to various room sizes and cooling requirements. Whether you need quick cooling for a small bedroom with the HK800TXVE/ME or powerful performance for a larger living area with the HK1600TXVE/ME, Haier provides options that fit your specific needs.

Ultimately, the Haier HK1200TXVE/ME, HK800TXVE/ME, HK1600TXVE/ME, HK1000TXVE/ME, and HK1400TXVE/ME air conditioners exemplify a blend of modern technology, aesthetic appeal, and reliable performance. This combination makes them ideal choices for anyone looking to improve their indoor climate with efficiency and style.