Haier Twin-tub Washing user manual Midway spinning

Page 12

Midway spinning

1.Put the laundries into the spin tub evenly and smoothly.

2.Spin

(1) Put the gland in properly.

Please put in the gland properly even if the

laundries quantity is small.

Push Gland

Push

Proper The laundries Proper No gland are slanting

(2) Close the inner and outer cover of the spin tub.

Outer cover of the spin tub

Inner cover of the spin tub

(3) Spin for 1-2 minutes.

3.Run the foam-removing spinning.

(1) Open the outer cover of the spin tub.

(2) Set the water-filling selector control

WASH SPIN

rod at the "SPIN" side. Fill water for about 1 minute.

If the water quantity filled is too large, the water may flow out from the wash tub side. Please twist the water tap to limit the water filling.

(3) Close the outer cover of the spin tub. Spin for 1-2 minutes.

10

Image 12
Contents Twin-tub Washing Machine Contents Meaning and description of the symbols Names of the partsSafety precautions Wet laundries on the control panelPetrol Installation and adjustment Install the lint filterHow to change the direction of the drain hoses You can fill Preparation before washing Pay attention to followings before washing the laundriesMusts in washing Usage of the detergentWashing sequence Midway spinning Rinsing Rinse with water-fillingSpinning Cleaning the lint filter Disposal after washingCleaning the overflow filter Trouble-shooting Answers to question Trouble-shooting Answers to question Specification Packing list