How to change the direction of the drain hoses
Figure 1 indicates the ex factory installation position of the drain hose.
Side sectional view
Drain hose | Fixing hook | ||
fixing hook | installation hole | ||
Pull outwards |
| Drain hose | |
slightly |
|
|
|
|
|
| |
Extend the drain hose from the side of spin tub.
Figure 1
Take off the drain hose from the hanging hole of the cabinet. Pull the drain hose fixing hook outwards gently to take out the drain hose from the two fixing hooks. (As per Figure 2)
| Take off |
| the drain hose |
Drain hose | Figure 2 |
fixing hook |
Rotate the drain hose fixing hook for 90
to take it out from the installation hole (As per Figure 3).
Install the two drain hose fixing hooks taken out into the installation hole at the other side of the base frame (to aim at the installation hole accurately you can lean the washing machine forward slightly).Then rotate
for 90
(As per Figure 4).
Pull the fixing hook outwards slightly. Inlay the drain hose into the fixing hooks reliably along the groove at spin tub side, and make it extend towards spin tub side.
Rotate the fixing 
hook for 90
| Rotate the fixing | |
Take off the fixing | hook for 90 | |
to fix it | ||
hook downwards | ||
Figure 3 | Insert the fixing hook into the | |
| installation hole upwards |
Figure 4
Figure 5 | Figure 6 |
Then hang the drain hose into the hanging hole at the spin tub side. (As per Figure 5).
Extend the drain hose from the rear side
Take out the drain hose from the fixing hook. Extend it from the rear side (When the drain hose is extended from the rear side, it can be hung on the point for drain hose at the two sides of the cabinet.) (See to Figure 6).
5