Haier HWM85-7288 user manual Use the operation buttons, Soak

Use the operation buttons

Off		Push the On/Off button to switch on the
On: indicate the program about to run,or indicate		power.
		When the power is on, push it again to
the selected mode or indicate the water level
		switch off the power. Push the
Flashing: indicate the running program
		On/Off button to switch on the power.
		If the start/pause button is not pushed, the
		washing machine will automatically switch
It displays “--” during detecting.		off the power after 5 minutes.
It displays total remained time during the
running program (min).
It displays remained reserved time during
reserve program hour	After the power is switched on,press it to start
It displays abnormal symbol in abnormal
	the machine.
situation.(See to Page 14)
	During working, push it to pause.
	During pause, push this button to restart
The digitron displays the time remained	and go on working
(in minute) before the washing is finished.
Push down the reserve button. The reserve
indicator light is on the digitron displays the
reserve time of finishing washing (in hour).
When the machine is started, the reserve		66L	72L
indicator light is on, indicating that the		54L	60L
reserve function is running.		38L	46L
		20L	29L
The washing machine can detect the
laundries automatically during After detection,
it will set the water level to suitable value
among 46L 60L 72L automatically during the	Program	Applicable situation
STANDARD program.
	SOAK	Washing the relatively big thick or very
The water level decided may be different from
actual value because of the different moisture		dirty laundries
level of the laundries.	STANDARD Common washing
You can also set water level by yourself. After		If “STANDARD” program is set, the
the machine is started, it will not set water		machine will execute fuzzy detection. The
level automatically. You shall push the		computer will set the water level and wash
start/pause button to make new setting.		time as per the cloth and quantity of the
If there’s water inside the tub, the machine		laundries. The whole procedure is under
cannot detect the laundries and will display		automatic control.
water level 60L.If wet laundries are put in, it	SOFT	Washing the woollen textiles
may display water level 72L. You must set	QUICK	Posthaste wash of the laundry under 2.0
suitable water level by yourself.
		kg with light soil.
If quick program is selected, it will display
		The water level will automatically set 38L .
water level 38L.
	WASH	Just run the washing cycle without
If tub dry program is selected, the water
		drainage cycle. The detergent was left
level will not respond.
		inside the drum and can be recycled.
During operation of wash and rinse program,
you can push down the waterlevel button to	RINSE	Remove the left detergent from the clothes
add water. When you release the button, or it		and then rinse the clothes
reaches the overflow water level, the machine	SPIN	When the clothes are washed or the
will stop adding water.		clothes are quite wet, extra spin is needed.
Rinse water level is more first level than	TUB DRY	The purpose is drying the inner tub and
washing (except the highest water level and
		the outer tub, which can avoid growing
hand choosing rinse water level).

11