Haier HWM80-0626S user manual Installation and adjustment, Usage of the drain hose

Page 6

Installation and adjustment

Please install and adjust the machine according to the requirement of the manual. It is

very important to your security and correct operating the machine.

Usage of the drain hose

The drain hose shall drain smoothly

1.The height of the drain hose shall be less than 10cm, or the drainage will not be smooth, and cost such long time that the machine may stop at mid way.

2.Do not ramp or press the drain hose.

3.If the drain hose is too long, cut it at mid point. To make smooth drainage, cut the front end of the hose slantingly.

4.If extra drain hose is needed, please make separate purchase. The inner diameter of the extra hose shall not less than 40mm, and the length shall not exceed 1.5m.

<10cm

> 30mm

<1.5m

If the extra hose is too long, cut it either at A or at B point.

A B

4

Image 6
Contents Twin-tub Washing Machine This manual is forContents Meaning and description of the symbols Names of the partsSafety precautions Dismantle Install Installation and adjustment Usage of the drain hoseInsert the water inlet hose into the water-filling Preparation before washing Pay attention to followings before washing the laundriesMusts in washing Usage of the detergentWashing sequence WashCalefactionWash Midway spinning Rinsing Rinse with water-fillingSpinning Cleaning the lint filter Cleaning the overflow filterDisposal after washing Disposal of the complete unit Trouble-shooting Answers to question When the remained water is frozenIf the laundries fall to the outer side of the spin tub Phenomena Reason Specification Packing list