4 Use the operation buttons
a Description of the function of buttons
Connection between the water inlet hose and the washer
Indicator mode and meaning
Flashing, indicating the running program
On, indicating the program about to run or the selection mode
CHILD LOCK FUNCTION
Push and hold the WATER LEVEL button and SPIN button, then push down the POWER ON/OFF button. The digitron displays CL . You can continue setting desired washing procedures. After setting, push downthe START/PAUSE button. The child lock function isactivated. All of the buttons are locked and cannot make selection.
1.Do not take off the water absorption cushion. Please check if the 
cushion is dropped or damaged before each usage. If it happens
please contact our 
2 Put the nut of the water inlet hose on the valve jointer.
3 Fasten the nut. Swing it gently to confirm if it's suitable.
nut of the water inlet hose
"Start/pause" button
After the power is switched on, press it to start the machine
During working, push it to pause.
Release the child lock function: push down the WATER LEVEL and SPIN button at the same time for more than 1 second. After a beep sound, the child lock function is released.
Soak Wash Rinse Spin
jointer of the | water absorption |
water inlet valve | cushion. |
Connection between the jointer of the water inlet hose and the water inlet hose
During pause, push this button to restart and go on working
••
1.Push down the slider. Insert the water inlet hose into the jointer.
the jointer of the 
water inlet hose
Over flow
Soak |
|
Wash |
|
Rinse | Spin |
Locking level
2 Hang the lock lever to the jointer. Release the slider till a click sound is heard.
Slider
Check the connection between the jointer of the water inlet hose and the water faucet
1.Swing the hose gently to confirm if it is fastened stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
SOAK 
button
Push the 
SOAK
button to set the soak procedure.
During 
STANDARD
NORMAL
and 
JEAN 
programs, push the 
SOAK
button to set different soak time (10,20,30 minutes)
During 
FIBER 
and
COTTON
programs, push the soak button to select soak procedure, but the soak time cannot change.
During 
QUICK 
POSTHASTE 
,
WOOLLEN
TUB DRY
, and
SILK 
programs, push the 
SOAK 
button, the machine
have no reaction.
WASH
button
Push the 
WASH
button to set the wash procedure.
During 
STANDARD
NORMAL 
and 
JEAN
programs, push the wash button to set different wash time (6,9,12,15 minutes)
During 
FIBER
, 
COTTON
WOOLLEN 
programs, push the 
WASH
button to select wash procedure, but the wash time cannot change.
During
QUICK
TUB DRY
,
POSTHASTE 
, programs, push the wash button the machine have no reaction.
RINSE 
button
Push the 
RINSE 
button to set the rinse and disinfect procedure.
During 
STANDARD
NORMAL 
and
JEAN
programs, push the 
RINSE
button to set different rinse times ( 0, 1, 2, 3, 4times).
While the "Overflow" digitron is lighting,the program of the overflow rinse has been selected.
During 
FIBER
, 
COTTON
,
WOOLLEN
programs, push the
RINSE 
button to select rinse procedure, but the rinse times cannot change.
During 
QUICK 
, 
POSTHASTE 
TUB DRY 
programs, push the 
RINSE 
button, the machine have no reaction.
SPIN 
button
Push the 
SPIN 
button to set the spin procedure.
During 
STANDARD
NORMA L
and 
JEAN
programs, push the 
SPIN
button to set different spin time (
During 
FIBER 
, 
COTTON 
,
WOOLLEN 
and 
SILK 
programs, push the 
SPIN
button to select spin procedure, but the spin time cannot change.
During
QUICK
, 
POSTHASTE 
, programs,
push the 
SPIN
button, the machine have no reaction.
4.Before each usage please check if the connection between the jointer of the water inlet hose and the water faucet, and the installation of the water inlet hose are firm, so as to prevent dropping from improper installation position.
Dismantle the water inlet hose
1.Close the water faucet.
2.Press the locking lever. Push down the slider. Then pull of the water inlet hose.
If the machine is used frequently, the jointer of the water inlet hose can be kept on the faucet to prevent damaging the fixing screw.
Locking level 
Slider