Haier HWM80-113S-Fiji user manual How to change the direction of the drain hoses

How to change the direction of the drain hoses

Figure 1 indicates the ex factory						Side sectional view
					Drain hose		Fixing hook
installation position of the drain			Figure 1
					fixing hook		installation hole
hose.					Pull outwards		Drain hose
Extend the drain hose from the side of spin tub.					slightly
						Take off
Take off the drain hose from the hanging						the drain hose
					Drain hose	Figure 2
hole of the cabinet. Pull the drain hose					fixing hook
fixing hook outwards gently to take out
the drain hose from the two fixing hooks.
(As per Figure 2)
Rotate the drain hose fixing hook for 90
to take it out from the installation			hole
(As per Figure 3).				Rotate the fixing		Rotate the fixing
Install the two drain hose				hook for 90		hook for 90
						to fix it
fixing	hooks taken out into			Take off the fixing		Insert the fixing hook into the
the installation		hole at the		hook downwards
						installation hole upwards
other side of the base frame				Figure 3		Figure 4
(to aim at the		installation
hole	accurately	you can
lean	the washing machine
forward slightly).Then rotate
for 90 (As per Figure 4).
Pull the fixing hook outwards slightly.
Inlay the drain hose into the fixing hooks
reliably along the groove at spin tub side,				Figure 5		Figure 6
and make it extend towards spin tub side.

Extend the drain hose from the rear side

Take out the drain hose from the fixing hook. Extend it from the rear side (When the drain hose is extended from the rear side, it can be hung on the point for drain hose at the two sides of the cabinet.) (See to Figure 6).

5