![](/images/new-backgrounds/1135226/13522611x1.webp)
Installation and adjustment
Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine.
Install the inner cover component
1.Open the top lid of the washing machine.
2.Put the inner cover component on the outer tub cover, aiming the inner cover shaft to the installation hole of the corresponding outer tub cover shaft groove.
3.Firstly insert the inner cover shaft of one side into the corresponding outer tub cover shaft groove, then push the another inner cover shaft into the corresponding outer tub cover shaft groove. Please install to designated position to guarantee there are no dropping or abnormal sound in opening and closing of the inner cover, and the operation shall be smooth. Do not dismount the inner cover component after washing.
Figure 1 | Figure 2 |
Inner cover component
II enlarged view
I enlarged view
Outer tub cover
Inner cover shaft | Inner cover shaft |
Outer tub cover shaft groove | Outer tub cover shaft groove |
Install the bottom plate
After you open the package, please lean the washing machine gently down on soft items (like the towel cloth, blanket, etc. ).
Install the bottom plate to the bottom of the machine with the eight screws by a cross screwdriver, then lift the machine up gently. See to the figure:
Front |
|
Back | Soft items |
Bottom plate |
Two claws at the bottom cover shall be inserted in two
Fasten the bottom plate to base frame with one screw.
6