Adjust the installation position
The largest allowed slope of the shank base of the machine is 2°. The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods:
●Adjust the adjustable foot:
To adjust the washing machine, please first lift up the front of the machine slightly, then twist the adjustable foot on the both side.
● Confirm it’s horizontal: Hang the lead line to check if it is horizontal.
+LJK /RZ
Usage of the drain hose
The drainage shall be smooth with the drain hose.
1.The height of the drain hose shall be less than 10cm, or the drainage will not be smooth, and cost such long time that the machine may stop at mid way.
2.Do not step on or press the drain hose.
<10cm
3.If the drain hose is too long, cut it at mid point. To make smooth drainage, cut the front end of the hose slantingly.
4. If extra drain hose is needed, please | |
make separate purchase. The inner | |
diameter of the extra hose shall not | |
less than 30 mm, and the length shall | |
not exceed 1.5 m. |
|
> | 30mm |
<1.5m |
|
4. If the extra hose is too long, cut it | |
either at A or at B. |
|
7