Haier XQG50-S1016 operation manual Matters needing attention

Page 3

Warning

1.If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

2.If a stationary appliance is provided, with a supply cord and a plug, the instructions shall state that the appliance must be positioned so that the plug is accessible.

Note: this requirement does not apply if the appliance incorporates other means for disconnection from the supply.

3.For washing machines with ventilation opening in the base, do not place directly on carpet as it will obstruct the openings.

4.The instructions shall state that the appliance is to be connected to the water mains using new hose-sets and that old-sets should not be reused.

Note: these instructions are not required if the hoses are permanently attached to the appliance.

5.When connecting the washing machine for water supply and drainage, make sure the plug is within reach.

6.Keep the vent outlet at the bottom of the washing machine free from being blocked.

7.To prevent danger, damaged electrical cables must be replaced by the manufacturer or an authorised service agent.

Matters needing attention

Safety

1. A separate earthed socket is required for the

2. Pull the plug and not the electric cable

power supply. After installation of the washing

when unplugging the washing machine.

machine the power plug must be accessible

 

during normal operation.

 

3. Fuses in the power circuit should be rated for

4. For you safety, dry your hands before tou-

15A. Contact a washing machine technician or

ching the washing machine and wear appro-

a desiganted service point for power cable

priate footwear.

replacement.

 

5. Do not use flammable detergents or dry c-

6. The door of the washing machine beco-

leaning agents; do not use flammable sprays

mes hot during the water heating or drying

near the washing machine; do not remove or

process. Avoid contact with the door during

insert the plug in the presence of flammable

the heating or drying process. For safety,

gas.

keep children away from the washing ma-

 

chine.

7. Do not allow children to play with the packing materials after unpacking.

16

1

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Sizehigh,depth,widthmm 850 595 WeightKg Technica specificationsNames of parts Electronic system diagramMatters needing attention There is a water leak Trouble shootingNecessary precautions or contact the lo Door violently Door and then close the porthole. Do not shutAmall items should be palced in a laun Abnormal Setting water level duringNever place heavy objects, e.g. a heating Laces and repair damaged areas. UnderwearLocation, replace the vibration mounting locks Installation MaintenanceAdjusting the position of the washing machine Which were removed during installation as30min Anti-becterium Program InstallationAdditional information 120 Dried 60min For ironingReference loading Control panel InstallationOperational functions PreparationsProgram selection
Top Page Image Contents