Haier XQG50-S1016 operation manual Additional information, Installation, Dried 60min For ironing

Page 7

Additional information

Tips

Adding the soften agent can help the laundry to get rid of the static electricity and make the cloths feel softly and easy to iron.

The following list shows the drying time for the different quantity and kinds of the laundry. You can select the expected drying program in accord with the quantity and the drying degree. The selected program will be over when the drying process is finished.

Weight of laundry

Time for drying

Remain time

Drying degree

( Kg )

( min )

 

 

 

 

 

 

0-1

 

59

Dried

 

Standard

 

 

1-2.5

120

Dried

 

 

 

 

 

0-1

 

 

Dried

 

60min

60

 

1-2.5

For ironing

 

 

 

 

 

 

 

 

 

Dry and

0-2.5

30min

30

anti-becterium

 

 

 

program

 

 

 

 

Installation

Connection of water inlet hose and washing machine

( Using new hose-set and old hose-set should not be reused. )

water inlet hose nut

Place the water inlet hose nut on the connector of the water inlet valve.

Slightly shake the water inlet hose nut to see if it is tightly and properly fixed.

connector of water inlet valve

Water drainage hose

The height of the terminal of the water drainage hose should be between 80-100cm. The water drainage hose must be securely placed on the clip on the back of the washing machine.

Use the water drainage support supplied as an acce- ssory for proper installation of the water drainage hose.

Fix the water drainage hose support with waterproof string. Do not use an excessively long water drainage hose and contract the authorized technician if the water drainage hose needs to be extended. The water drainage hose should not be extended more than 250cm ( longer extension will result in concurrent water inflow and outflow ). The diameter of the extension hose should be the same as the original hose.

Caution: Water drainage hose must not be immersed in water.

The original and extension hoses should be tightly connected.

Connection of power supply

Check the following items before connection to the power supply.

The socket conforms to the maximum power load ( The maximum current load of the socket and power supply cable should not be less than 15A ).

Power supply voltage conforms to the required value.

The power supply socket and the plug of the washing machine compatible, if they are compatible, refer to a washing machine technician or a designat- ed service point for power cable replacement. The washing machine should be connected to the earth before use.

12

5

Image 7
Contents Sizehigh,depth,widthmm 850 595 WeightKg Technica specificationsNames of parts Electronic system diagramMatters needing attention There is a water leak Trouble shootingNecessary precautions or contact the lo Door violently Door and then close the porthole. Do not shutAmall items should be palced in a laun Abnormal Setting water level duringNever place heavy objects, e.g. a heating Laces and repair damaged areas. UnderwearLocation, replace the vibration mounting locks Installation MaintenanceAdjusting the position of the washing machine Which were removed during installation as30min Anti-becterium Program InstallationAdditional information 120 Dried 60min For ironingReference loading Control panel InstallationOperational functions PreparationsProgram selection