Haier XQG50-11 user manual Cotton Cycle, Synthetics Cycle

Page 10

XQG50-11 Manual 10/29/02 1:51 PM Page 11

English

Cotton Cycle:

Pre-Wash Cycle: The purpose of this cycle is that if you want to pre-wash heavily soiled clothes before the actual wash cycle begins. This cycle is configured in such a manner that it will go through Intense Normal Delicate wash cycles time mode and then the rinse and spin cycles automatically to complete the wash. The total time for this cycle is approximately 147 minutes when selected.

Intense Wash Cycle: This is used for work & play, household linens, heavily soiled and cotton clothes. This cycle is approximately 120 minutes.

Normal Wash Cycle: This is used for normal to lightly soiled items that needs to be washed. This cycle is approximately 80 minutes.

Delicate Wash Cycle: This is also used for load of soiled items that needs to be washed delicately. This cycle is approximately 60 minutes.

Synthetics Cycle:

Intense Wash Cycle: This cycle is used for heavily soiled permanent press, silks, woolens, nylon and acrylic fabrics. This cycle is approximately 59 minutes.

Normal Wash Cycle: This is used for a small load of lightly soiled items that needs to be washed. This cycle is approximately 42 minutes.

Delicate Wash Cycle: This cycle is used for loads of soiled items that need to be washed delicately. This cycle is approximately 33 minutes.

•If you set the machine to automatically dry after the wash cycle, the machine will wash and then dry without interruption. However if you press "No Spin" button the machine will drain and shut-off after the wash cycle is complete. It will not spin or advance to the dry cycle.

•If you do not set the machine for automatic drying and do not depress the "No Spin" button after the wash portion of the cycle is complete (at "Soak/Pause" indication on control panel) the machine will stop. You must either:

A)Drain Only: Prevent spinning by pressing the On/Off switch, advance the “Cycle Selector Knob” to “Drain” and again press the "On/Off" switch.

B)Drain and Spin: Press the On/Off switch, advance the "Cycle Selector Knob" to "Spin" and again press the "On/Off" switch.

9

Page 9 Page 11
Image 10
Page 9 Page 11
Contents XQG50-11 Important Safety Instructions Read all instructions before using the applianceFor Future Use Warranty service Table Of Contents Parts and Features Operating InstructionsEnglish Spin Cycle Selector Button Power ButtonFront Load Washer Advantages of No-Spin CycleWash Cycle Cotton Cycle Synthetics WoolCotton Cycle Synthetics CycleWool Cycle Synthetic Cycle TemperatureType of Cycle Type of Temperature Cotton Cycle Loading the WasherProper Use of Dispenser Proper Use of Fabric SoftenerDryer Operation Proper Use of DetergentDry Time Selection Heat Type Types of clothes Automatic Operation of the Dryer Manual Operation of the DryerLoading the Dryer Button Trap CastersCleaning and Maintenance Normal Operating SoundsMoving & Vacationing Storage of Your Appliance in Cold EnvironmentTroubleshooting Washer is making noise Problems with clothesDryer does not operate Dryer is working but not drying the clothes Dryer making noise when dryingStatic Installation Instructions Tools and Materials RequiredUnpacking Your Appliance Installing Your Washer Steps for InstallationLeveling Your Appliance Drain Hose Unit Dimensions Wiring Requirements Power InterruptionsGrounding Instructions Limited Warranty Importante
Top Page Image Contents