Haier XQG50-11 Manual Operation of the Dryer, Automatic Operation of the Dryer, Loading the Dryer

Page 15

XQG50-11 Manual 10/29/02 1:51 PM Page 16

English

Note: For full loads, you may want to remove 1/3 to 1/2 of the load and dry the remaining clothes seperately. This will be an efficient way to dry your clothes and will not take as long to dry. For less than full loads, you may want to reduce drying time. This will prevent over drying of your clothes.

Manual Operation of the Dryer:

To operate the dryer manually, simply load machine with wet clothes, turn the "Dryer Selector Knob" to the desired time and push the power button "ON".

Note: When operating the dryer, you must keep "Wash Cycle Selector" knob in the "OFF" position.

Automatic Operation of the Dryer:

For the automatic operation, simply set the Dry Cycle Selector Knob to the desired time at the beginning of the wash cycle. When the wash cycle is finished, the dryer will turn on automatically.

Note: The dryer will not turn on automatically if the "No Spin" button is pushed in. You must keep the "No Spin" button in an out position in order to go from wash function to dryer function automatically. The dryer will not come on automatically after the wool cycle.

Note: When washing full load, we recommend that you keep the spin cycle in the "OFF" position to prevent the unit from going to dry mode automatically at the end of cycle if the spin cycle was in "ON" position. This will give you the flexibility to take out 1/3 to 1/2 of the load and dry the remainder. The advantage is that your clothes will dry evenly and more quickly.

Loading the Dryer:

1.Sort clothes for drying. Seperate dark and light colored items, like you do for washing. Check for stains that have not been removed in washing. Dryer heat may permanently set some stains. Properly dried clothes will need minimum of care when removed from dryer.

2.Load up dryer with washed clothes. For optimum result, use dryer load of similar weight, fabric and construction. Place small items in a mesh bag to prevent from tangling. Do not overload the dryer. Add fabric softener sheet if desired.

3.Select the drying time depending on the fabric type and load size.

4.Wait for the drying cycle to finish before opening the door.

Note: Do not over dry your clothes. over drying can cause shrinkage, harshness and wrinkling of fabric.

14

Image 15
Contents XQG50-11 Read all instructions before using the appliance Important Safety InstructionsFor Future Use Warranty service Table Of Contents Operating Instructions Parts and FeaturesEnglish Advantages of No-Spin Cycle Power ButtonFront Load Washer Spin Cycle Selector ButtonCotton Cycle Synthetics Wool Wash CycleSynthetics Cycle Cotton CycleWool Cycle Loading the Washer TemperatureType of Cycle Type of Temperature Cotton Cycle Synthetic CycleProper Use of Fabric Softener Proper Use of DispenserProper Use of Detergent Dryer OperationDry Time Selection Heat Type Types of clothes Manual Operation of the Dryer Automatic Operation of the DryerLoading the Dryer Casters Button TrapNormal Operating Sounds Cleaning and MaintenanceStorage of Your Appliance in Cold Environment Moving & VacationingTroubleshooting Problems with clothes Washer is making noiseDryer does not operate Dryer making noise when drying Dryer is working but not drying the clothesStatic Tools and Materials Required Installation InstructionsUnpacking Your Appliance Steps for Installation Installing Your WasherLeveling Your Appliance Drain Hose Unit Dimensions Power Interruptions Wiring RequirementsGrounding Instructions Limited Warranty Importante