Haier HWM75-276S user manual Washing sequence

Washing sequence

Wash selector					Water-filling selector handle
(standard current,
gentle current)
Wash timer	Water-filling entrance			Overfilling sign
(To set to below 2 minute,
			Buzzer		Spin	timer
first set to 5 minute then
turn it back. it can increase		(The buzzer will ring when			(to set to below 1 minute,
the service life of the timer).
		the	washing	finishes)	first set to 2 minute then
					turn it back. it can increase

the service life of the timer).

	STANDARD
OFF	OFF
	GENTLE

15	3	DRAIN
		MAX
12	6	BUZZER

9WASH SELECTOR

WASH TIMER

OFF

5 1

42

3

SPIN TIMER

Wash

1.Water-filling selector

(1)Set the water-filling selector at the "WASH" side. (Figure 1)

(2)Set the water level adjusting lever to needed line.

2.Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 2)

Run washing program for some time to stir and dissolve the powder completely.

WASH SPIN

Figure 1

Figure 2

3.Put in the laundries. If the water quantity is insufficient, please add water.

STANDARD

GENTLE

DRAIN

WASH SELECTOR

Figure 3

4.Select the current.

Select the strength of the current according to the laundries. (Figure 3)

5.Select the washing time

Select the washing time according to the laundries. (Figure 4)

OFF
	3
12	6
9	Figure 4
WASH TIMER
	STANDARD
GENTLE

6.After washing, the buzzer will ring. Set the "WASH SELECTOR" at "DRAIN". (Figure 5).

DRAIN

WASH SELECTOR

Figure 5

8