How to change the direction of the drain hoses
Figure 1 indicates the ex factory installation position of the drain hose.
Extend the drain hose from the side of spin tub.
Take off the drain hose from the hanging hole of the cabinet. Pull the drain hose fixing hook outwards gently to take out the drain hose from the two fixing hooks. (As per Figure 2)
Rotate the drain hose fixing hook for 90 to take it out from the installation hole (As per Figure 3).
Drain hose |
| Figure 1 |
fixing hook |
| |
Side sectional view | ||
Drain hose | Fixing hook | |
fixing hook | installation hole | |
Pull outwards | Drain hose | |
|
| |
slightly |
| Figure 2 |
Take off |
| |
the drain hose
Install | the | two | drain hose |
| |
fixing | hooks taken out into |
| |||
the installation | hole at the |
| |||
other side of the base frame |
| ||||
(to aim at the | installation | Rotate the fixing | |||
hook for 90 | |||||
hole | accurately | you can | |||
| |||||
lean | the washing machine | Take off the fixing | |||
forward slightly).Then rotate | |||||
hook downwards | |||||
for 90 (As | per | Figure 4). |
| ||
Figure 3
Pull the fixing hook outwards slightly. Inlay the drain hose into the fixing hooks reliably along the groove at spin tub side, and make it extend towards spin tub side.
Then hang the drain hose into the hanging hole at the spin tub side. (As per Figure 5).
Rotate the fixing
hook for 90 
to fix it
Insert the fixing hook into the installation hole upwards
Figure 4
Figure 5
Extend the drain hose from the rear side
Take out the drain hose from the fixing
hook. Extend it from the rear side (When the drain hose is extended from the rear side, it can be hung on the point for drain
hose at the two sides of the cabinet.) (See to Figure 6).
Figure 6
5