Haier XPB56-23S user manual Before f

Page 5

Installation and adjustment

Beforef

Usingi

Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine.

Usage of the drain hose

The drainage shall be smooth with the drain hose.

1.The height of the drain hose shall be less than 10cm , or the drainage will not be smooth enough and cause incomplete drainage.

2.Do not tramp or press the drain hose.

3 If the drain hose is too long, cut it at mid point. To make smooth drainage, cut the front end of the hose slantingly.

4.If extra drain hose is needed , please make separate purchase. The inner diameter of the extra hose shall not less than 30mm, and the length shall not exceed 1.5m.

<10cm

> 30mm

<1.5m

If the extra hose is too long, cut it either at point A or B.

A B

Install the lint filter

After opening the package,pleasetakeoutthelintfilterfrom the document bag,install it to the overflow filter of the wash tub.See to the figure.

Overflow filter

Lint filter

Image 5
Contents XPB56-23S Twin-tub Washing Machine Names of the parts Safety precautions Safety precautions Before f How to change the direction of the drain hoses Introduction of the major function Using process Pay attention to followings before washing the laundries Preparation before washing Using processReference weight of the laundries Musts in washing Using processHow to use the whitener Usage of the detergent Using processWashing sequence Page Spinning Page Page Page Push Gland Proper Laundries Proper No gland Are slanting Cleaning the lint filter Disposal after washing Using processCleaning the overflow filter If the laundries fall to the outer side of the spin tub Trouble-shooting Answers to questionTrouble-shooting Answers to question Packing list Specification