Haier XPB56-23S user manual How to change the direction of the drain hoses

Page 6

Before Using

How to change the direction of the drain hoses

Figure 1 indicates the ex factory installation

 

position of the drain hose.

Soft item

 

Extend the drain hose from the side of spin tub

Put soft items on the ground. Lean the machine down gently with the front surface facing the ground. Take off the drain hose from the cabinet. Take the hose out of the fixing groove.

(See to Figure 2).

Soft item

Embed the drain hose into the groove along the side of the spin tub in the order of (1)~(3), heading for the side of the spin tub. (See to Figure 3).

Embed the drain hose into the groove with hands. Take care not to damage the drain hose in fastening the fixing clamp.

Extend to the spin tub side

Extend the drain hose from the rear side

Back

Front

Figure 1

Figure 2

Embed into the

groove in turn Figure 3

Take out the drain hose from the fixing groove. Extend it from the rear side as per the direction of the arrow. (When the drain hose is extended from the rear side, it can be hung on the point for drain hose at the two sides of the cabinet.) (See to Figure 4).

Figure 4

Install the water inlet hose; Select the water level

Insert the water inlet hose into the water-filling

Water inlet hose

entrance on the control panel.

 

Water inlet

Select water level according to the quantity of the laundries.

Set the water level adjusting lever to needed line.

Page8

Water level indicator

Maximum Max

about 43L

Med

Medium

about 36L Min

Minimum

about 30L

Image 6
Contents XPB56-23S Twin-tub Washing Machine Names of the parts Safety precautions Safety precautions Before f How to change the direction of the drain hoses Introduction of the major function Using process Preparation before washing Using process Pay attention to followings before washing the laundriesMusts in washing Using process Reference weight of the laundriesUsage of the detergent Using process How to use the whitenerWashing sequence Page Spinning Page Page Page Push Gland Proper Laundries Proper No gland Are slanting Disposal after washing Using process Cleaning the lint filterCleaning the overflow filter Trouble-shooting Answers to question If the laundries fall to the outer side of the spin tubTrouble-shooting Answers to question Packing list Specification