Haier XQB50-68 user manual How to change the direction of the drain hose

How to change the direction of the drain hose

1.Dismantle the back cover of the washing machine.

2.Put down the drain hose. Take off the drainhose frame. As indicated in Figure 1, put thedrain hose into the cabinet.

Then stretch onehand into the cabinet to nip the claw of the drain hose bush- ing to remove the claw fromoriginal position. Take off the drain hose bush- ing with the other hand. (As indicated in Figure 2 and 3).

Outer drain hose

3.Dismantle the protecting cover of the drain outletat the other side (method the same as the bushing). Install the bushing as per indicated in Figure 4.

4.Extend the drain hose from the other side. Fix thedrain hose onto the base frame with the drain hoseframe. (As indicated in Figure 5)

Drain outlet protecting cover

Drain hose frame	Drain hose bushing
Figure 1	Figure 2
Cabinet
Inner	Outer
Press	Drain hose
	bushing
Drain hose	Take off
bushing claw
Press

Drain hose bushing

Figure 4 Figure 5

5.Install the protecting cover of the drain outlet at the other side as per indicated in Figure 6.

Figure 3 Figure 6

Usage of the drain hose

Before using , hang up the drain hose on suitable location. Do not put down the drain hose on the ground.

Confirm the end of drain hose is higher than the level of tub . If not the siphon will being .

<1.2m