Install the water inlet hose

1.Attach the water inlet hoses to the water faucet. Using pliers, tighten the coupling. ( As figure 1)

NOTE: Do not over tighten. Damage to the valves can result.

2. Connect the other ends to the water inlet valve .

( As figure 2)	Figure 1
( As figure 2)
	Jointer of the water inlet hose

Wash remain time indicator digitron

The program is selected but not on,It displays the total minutes of the program

During operation of programs, it displays the remained time (minute).

In case of abnormal phenomenon, it displays the abnormal symbol (see to Page 16)

Page 16

Start/Pause button

After the power is switched on, push it to

Start the machine

During working, push it to pause working.

During pause, push it to resume working.

Power On/Off button

Push the POWER ON/OFF button to switch on the power. When the power is on, push it again to switch off the power. Push the POWER ON/OFF button to switch on the power. If the START/PAUSE button is not pushed, the washing machine will automatically switch off the power after 5 minutes.

Jointer of the
water inlet valve	Figure 2
	Figure 2
Water absorption cushion

POWER

ON/OFF

START

PAUSE

WASH button

Push the WASH buttonto set the wash procedure.

During STANDARD GENTLE HEAVY programs, push theWASH button to set different wash time (STANDARD from0 to

25minutes GENTLE from 0 to 15 minutes;HEAVY from 30 to 50 minutes or 0 minutes )

During SAVE program, push the WASH button, the machine have no reaction.

PROGRAM SELECTION button

You can select from the following four programs.

Program	STANDARD	Normal wash
Program	HEAVY	Large, thick or heavily soiled laundry
	GENTLE	Woollen textiles or underwear

	SAVE	10 min quick wash for load below 2 kg