Haier WMS656 user manual Washing sequence

Washing sequence Using process

Wash timer

(To set to below 2 minute, first set to 5 minute then turn it back. it can increase the service life of the timer).

Wash selector	Spin water-filling entrance	Spin timer
(Strong current,		(to set to below 1 minute,
standard current)		first set to 2 minute then
		turn it back. it can increase
		the service life of the timer).

OFF STRONG OFF

	STANDARD
		DRAIN
		Spin water-filling entrance
9	WASH SELECTOR	3
WASH TIMER
			SPIN TIMER

Wash

1.Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 1)

Run washing program for some time to stir and dissolve the powder completely.

2.Put in the laundries. If the water quantity is insufficient, please add water.

3.Select the current.

Select the strength of the current according to the laundries. (Figure 2)

Figure 1

STRONG

STANDARD

DRAIN

WASH SELECTOR Figure 2

OFF

4.Select the washing time

Select the washing time according to the laundries. (Figure 2)

Figure 3

WASH TIMER

5.After washing, set the "WASH SELECTOR" at "DRAIN". (Figure 4).

STRONG

STANDARD

DRAIN Figure 4

WASH SELECTOR