Haier WMS656 user manual How to change the direction of the drain hoses

Before Using

How to change the direction of the drain hoses

Figure 1 indicates the ex factory installation position of the drain hose.

Extend the drain hose from the side of wash tub

Back

Soft item

Side sectional view

Put soft items on the ground. Lean the machine down gently with the front surface facing the ground. Take off the drain hose from the cabinet. Take the hose out of the fixing groove.

(See to Figure 2).

Front Figure 1

Soft item

Embed the drain hose into the groove along the side of thewash tub in the order of (1)~(2), heading for the side of the wash tub. (See to Figure 3).

Embed the drain hose into the groove with hands. Take care not to damage the drain hose in fastening the fixing clamp.

Extend the drain hose from the rear side

Take out the drain hose from the fixing groove. Extend it from the rear side as per the direction of the arrow. (When the drain hose is extended from the rear side, it can be hung on the point for drain hose at the two sides of the cabinet.)

(See to Figure 4).

Figure 2

Figure 3

Figure 4

Select the water level

Select water level according to the
quantity of the laundries.	Water level
Set the water level adjusting lever	indicator
to needed line.
Page8	Maximum Max.
	about 43L

Med

Medium

about 36L	Min
Minimum
about 30L