Haier XPBM15-0501 manual Safety precautions

Page 4

Safety precautions

Please plug the washer into a 220V-240V a.c receptacle. Be sure to use single-phase three pin receptacle. Ensure the earthing prong of the power receptacle is earthed reliably. Use leakage protector if possible.

Earth

The appliance must be positioned so that the power plug is accessible.Be sure to pull the plug out and close the water faucets in the following cases: power failure, installing the machine,leaving the machine idle or cleaning the machine. Do not push or pull the power plug with wet hand.

If the appliance is attached to an extension cord or electrical portable outlet device,it should not be exposed to the splashing of water or ingress of moisture.

Do not twist pinch or damage the cord. If the cord or plug becomes damaged, please contact the service agent or an authorised technician.

Do not put the machine in damp places like the bathroom. Never wash it with water. Do not put wet clothes on the control panel.

If the washing machine is installed on carpet, do not block the ventilation hole with carpet.

The ventilation holes at the bottom

soft items

Do not use water hotter than 50 C .

Do not wash water-proof items like the raincoat, bike covers etc.

Do not let the machine share one power point with other electric appliances. If the power plug is damaged or loose, do not use the plug any more.

2

Image 4
Contents Page Contents Packing listDescription of the symbols Forbidden signSafety precautions Petro Adjust the installation position Installation and adjustmentUsage of the drain hose Preparation before washing Reference weight of the laundriesPay attention to the following before washing Usage of whitener Detergent usageUsage of washing powder Connect the power Washing ProcessConnect the water hose provided to the water mains Close the lidWashing duration reference Disposal after washingFinish washing Trouble shooting Specifications003080