Haier XPBM15-0501 manual Washing Process, Connect the water hose provided to the water mains

Washing Process

1. Connect the water hose provided to the water mains

Install the water inlet hose

Insert the water inlet hose into the water-filling entrance on the control panel.

NOTE

1.Confirm that the drain hose is properly stowed before filling with water, or the water will flow through the drain hose.

2.Inside the machine you will see water filling levels-"1" "2" "3"and"MAX".

This relates to the amount of washing you are using.Never exceed the "MAX"Mark!

Water inlet hose

Water-filling entrance

3.Only use the new hose set provided.

2.Connect the power

Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle.

3.Fill the machine enough with water to mix detergent, put in your laundry and fill up water to the desired level.

4.Close the lid.

7