Haier WNA600TX manual Vibrates too, Much when, Spinning, Stops operating, Before finishing

Page 19

Solution to Problems

The machine

Check that:

vibrates too

the transit bolts have been removed (see

much when

installation manual);

spinning

the machine is level;

 

the washing load is according to the instructions

 

given in this booklet.

 

 

The machine

Check that:

stops operating

there is a sudden power failure or water stop.

before finishing

the machine is in the normal state of rinse.

Image 19
Contents T O MAT IC DR U M WA S H ING MA C H INE Page 17-18 11-15Function Introduction Characteristics of WNA600TX Unpacking levelling and positioning InstallationConnection of tap and Loading Hose Electric connectionConnecting WaterSupply Close up Close up Close up Correctly Weight is rightLaundry has Been loadedProgramme has CorrectBeen chosen Detergent has been put in properly Never place bleach in the other compartments Wash is finished Cycle is startedMaintenance five simple precautions for this machine Fill with water Washing machine wont startWashing Machine wontStops operating Vibrates tooMuch when SpinningGuide for selecting programme Page Wiring Circuit WNA600TX Page 0020505064B