English
Installing Your Washer
Read the installation instructions carefully and ensure washer location before beginning.
Installing Quick Sink Adapter:
When installing the quick sink faucet adapter to the faucet, follow the steps below:
1.First, remove the aerator from your faucet nozzle and determine the size/type of the faucet.
2.Once you determine the size/type of the faucet (Outside Threaded End or Inside Threaded End), place the proper sized rubber washer into the silver faucet adapter.
3.Attach the silver faucet connector to the faucet.
A
Outside Thread
B
Large Inside thread
4.Attach the faucet connector to the water inlet hose and make sure that the rubber washer is placed in between.
5.Attach the other end of the water inlet hose to the washer water inlet and make sure that the rubber washer is placed in between.
Attached hose to water inlet
As a second option, you can install directly to a fixed utility hot and cold water outlet by using a “Y Hose” (NOT suppliered) .
To washer inlet
Note: Incomfing hot water must not exceed 122˚F/50˚C.
13