Haier WD-9999-14 Selecting the Water Level, Recommended Water Levels, End-of-Cycle Signal

Page 20

English

Selecting the Water Level

There are 3 pre-set water levels to chose from: Low, Medium and High and 1 manual overide selection using the knob. Your selection may depend on your

wash load.

 

High

Medium

 

 

Manual

Low

Water Level

 

Turning the knob to “MANUAL” will add more water to your wash load as long as it is held in that position. Release knob after setting to the desired water level by manually adding water.

Recommended Water Levels

Load Size in lbs

Water Level

Approximate

 

 

Water used in

 

 

Gallons

3.3

High

8.72

1.76

Medium

5.81

Less than 1.76

Low

3.70

 

 

 

End-of-Cycle Signal

The machine will beep at the end of the cycle, indicating that the washing is complete. The “Wash/Rinse/Spin” indicator lights will still be ON. The washer will turn OFF automatically in approximately 10 minutes after the completion of the cycle.

Closing the Top Lid

For safety purposes, the top lid must always be closed during the wash process. If you open the top lid while the wash cycle is in progress, you will observe the following:

An alarm will sound.

The tub will not spin while the lid is open.

If the unit is in wash mode, it will stop running.

Simply close the top lid and press the start/pause button to resume the cycle.

19

Image 20
Contents Quality ß Innovation ß Style Product registration You will need it to obtain warranty serviceUnpacking your washing machine Important Safety Instructions Read all instructions before using the applianceHouehold USE only Tools and Materials RequiredSafety Instructions Wiring RequirementsAttempting any maintenance or cleaning EnglishTable of contents Parts Unpacking and checking partsUnpacking Back View Washer parts and featuresFront View Control panel Quick set-up instructions for normal wash Cold Environments Installation instructionsProper location Step Installing the Bottom Panel Leveling the Washer Caster OptionInstalling Your Washer Installing Quick Sink AdapterInstalling the Lint Filter Operating your washer Control PanelSteps for the Wash Process Lint Filter and Water FilterSelecting the Wash Cycle Program Select Wash Program ApplicationHeavy Wash Quick WashEnd-of-Cycle Signal Selecting the Water LevelRecommended Water Levels Closing the Top LidProper Use of Bleach Loading the WasherProper Use of Detergent Long Absences / Moving Proper care and cleaningGeneral Cleaning and Maintenance Normal Operating Sounds Troubleshooting guide Washer does not operateProblems with water Washer makes noisesProblems with clothing OtherLimited Warranty Haier America New York, NY