Haier AWT-120LI Maintenance, Names of the parts, Cleaning the overflow filter, Forbidding sign

Page 3
Elastic fixing claw

Maintenance

After using, please clean the lint and eyewinker of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning.

Cleaning the lint filter

The lint filter must be used during washing.

It must be cleaned in time after each using.

1. Press the elastic piece at upper end of lint filter to release the tab from the filter cover, and pull the lint filter outward to remove it. (See Figure 1).

Names of the parts

Drain selector

Wash selector

Wash timer

Outer cover of the spin tub

 

Water-filling entrance

 

Control panel

Inner cover of the spin tub

 

 

Spin timer

Filter frame

Major frame

Water level adjusting lever

 

Lint filter

Spin tub

Wash tub

 

Valve cover

Cabinet

Wash tub cover

 

2. Remove lint

Pull the lower end of lint filter rear cover outward to disassemble it from the lint filter front cover. Remove lint completely with clear water. (See Figure 2).

Figure 1

Lint filter rear cover

Pulsator

Drain hose

Base frame

Notes: All illustrations in this manual are given for reference only. Your products and accessories may show differences from these illustrations due to our

Disassemble

Assemble

Lint filter front cover

3. Install lint filter

Figure 2

Cleaning the overflow filter

Too much lint on the overflow filter will influence the normal usage of the machine. Please clean it every two months.

1 Take off the overflow filter.

As indicated in the figure, nip the elastic fixing claw and pull it to the direction of the arrow to take it off.

12

continuous improvement.

Meaning and description of the symbols

 

Contents marked with that symbol are related

Warning sign

to the safety of the product and the personal

 

safety of the users. Please operate in strict

 

conformity to the contents, otherwise it may

 

cause damage of

the machine or injure the

 

personal safety of the user.

 

 

Forbidding sign

Contents marked with that symbol are actions

forbidden to perform. Performing of those

 

 

actions may result

in damage of the machine

 

or injure the personal safety of the user.

 

 

 

Please check if the power receptacle has good earthing condition before using to guarantee your safety.

1

Image 3
Contents Trouble-shooting Trouble-ShootingUsage of the detergent Washing sequence Water inlet hose Cleaning the overflow filterWater level adjusting lever Corrugation pipe Disposal of the complete unitForbidding sign MaintenanceCleaning the overflow filter Names of the partsBathroom . Never Wash it Safety precautionsSpinning Do not put the machine at dampRinsing Rinse with water-fillingRinse with stored water Case water flows out from wash tub side Installation and adjustmentMidway spinning Drainage shall be smooth with the drain hoseDrain selector Install the water inlet hose Select the water levelDo s and Don ts Usage of the detergentPreparation before washing