Washing sequence
How to change the direction of the drain hoses
Water inlet
Water filling control handle
Wash timer
(To set to below 2 minute, first set to 5 minute then turn it back. it can increase the service life of the timer).
Wash selector | Drain selector |
| Spin timer | |
(Standard current, | (Do not set drain selector | (To | set to below 1 minute, | |
first set to 2 minute then | ||||
strong current) | on Drain position during | |||
turn it back. it can increase | ||||
| washing) | |||
| the service life of the timer). | |||
|
| |||
Figure 1 indicates the ex factory installation |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Back |
position of the drain hose. | Soft item |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OFF
153
STRONG
STANDARD
OFF | OFF |
| |
5 | 1 |
DRAIN |
|
Front |
Extend the drain hose from the side of spin tub |
126
WASH SPIN
9
WASH TIMER
WASH SELECTOR
4 | 2 |
| 3 |
DRAIN SELECTOR | SPIN TIMER |
Figure 1 |
Put soft items on the ground. Lean the machine down gently with the front surface facing the ground. Take off the drain hose from the cabinet.
Wash
Take the hose out of the fixing groove. (See to Figure 2).
1 Inlet selector
(1) Set inlet selector to Wash side. Figure 1 (2 )Adjust water level rod to a position as needed.
2.Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 2)
Run washing program for some time to stir and dissolve the powder completely.
WASHSPIN
Figure 1
Figure 2
STRONG
STANDARD
Embed the drain hose into the groove along the side of the spin tub in the order of (1)~(3), heading for the side of the spin tub. (See to Figure 3).
Embed the drain hose into the groove with hands. Take care not to damage the drain hose in fastening the fixing clamp.
Soft item
Extend to the spin tub side
Figure 2
Embed into the groove in turn
Figure 3
3.Put in the laundries. If the water quantity is insufficient, please add water.
4.Select the current.
Figure 3
Install the water inlet hose; Select the water level
Select the strength of the current according to the laundries. (Figure 3)
5.Select the washing time
Select the washing time according to the laundries. (Figure 4)
6.After washing,the buzzer will ring .Set the "DRAIN SELECTOR" at "DRAIN".
OFF
153
126
Figure 4
9
OFF
Insert the water inlet hose into the
Select water level according to the quantity of the laundries.
Set the water level adjusting lever to needed line.
Water inlet hose
Water inlet
Water level indicator
(Figure 5).
DRAIN
Use the new water inlet hose provided
Maximum
Max
with the machine to connect to the
Medium
Med
Figure 5
water faucet.Old hose sets should 
not be reused.
Minimum Min
8
5