Kenmore 2707, 2708 Installation Requirements, Tools and Parts, Parts supplied, Alternate Parts

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. The parts supplied are in the washer basket.

Tools needed for connecting the drain hose and water inlet hoses:

■ Pliers that open to 1⁹⁄₁₆"	■ Flashlight (optional)
(3.95 cm)

Parts supplied:

ABC

D

A. Drain hose form

B. Water inlet hoses (2)

C. Flat water inlet hose washers (4)

D. Beaded tie strap

Alternate Parts

Parts listed are available from your local Sears store or Sears Service Center. For further information, call 1-800-4-MY-HOME®

(1-800-469-4663).

If You Have:	You Will Need to Buy:
Laundry tub or	Sump pump system (if not already
standpipe taller	available)
than 96" (2.4 m)
1" (2.5 cm)	2" (5 cm) diameter to 1" (2.5 cm)
diameter	diameter standpipe adapter,
standpipe	Part Number 3363920 and connector kit
	Part Number 285835
Overhead sewer	Standard 20 gal. (76 L) 39" (99 cm) tall
	drain tub or utility sink, sump pump and
	connectors (available from local
	plumbing suppliers)
Floor drain	Siphon break, Part Number 285834;
	additional drain hose,
	Part Number 8318155 and connector
	kit, Part Number 285835
Water faucets	2 longer water fill hoses:
beyond reach of	6 ft (1.8 m) Part Number 76314,
fill hoses	10 ft (3.0 m) Part Number 350008
Lint clogged drain	Drain protector, Part Number 367031

Tools needed for securing the drain hose and leveling the washer:

■	Adjustable or open end	■	Wood block
	wrench ⁹⁄₁₆" (14 mm)	■	Ruler or measuring tape
	Level
■

5