Modifiers
Modifiers allow you to further customize your cycles and save energy.
Soil Level (Wash Time)
Soil level is preset for each cycle. See “Preset Cycle Settings” in “Cycles.” As you press the Soil Level pad, the cycle time (minutes) will increase or decrease in the Estimated Time Remaining display. To get the minimum wash time, press the pad until the indicator light next to Light illuminates. This is the shortest wash time available for that cycle.
■For most loads, use the time recommended in the preset cycle settings.
■For heavy soil and sturdy fabrics, press Soil Level to select more wash time, if needed.
■For light soil and delicate fabrics, press Soil Level to select less wash time, if needed.
Temperature Guide
Wash Water Temperature | Suggested Fabrics |
|
|
Hot | Whites and pastels |
|
|
Warm | Bright colors |
|
|
Cold | Darker colors that bleed or |
| fade |
NOTE: In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve well. Soils may be difficult to remove.
Auto Temp Control
Auto Temp Control (ATC) electronically senses and maintains a uniform wash and rinse water temperature. ATC regulates incoming hot and cold water. The ATC is automatically turned On when a cycle is selected. (See “Preset Cycle Settings” in “Cycles.”)
ATC is available with Warm/Warm, Warm/Cold and Cool/Cold settings. The water temperature in the Hot/Cold and Cold/Cold settings depend on the water temperature at the water inlet faucets.
■ATC ensures consistent cleaning.
■Heated water consumes the largest amount of energy that a washer uses.
■Today’s detergents work well at temperatures above 60°F (15.6°C).
Spin Speed
This washer automatically selects the spin speed based on the cycle selected. The preset speeds can be changed. Spin speeds may vary by cycle.
Delay Start
You can use the Delay Start feature to delay the start of a wash cycle for up to 13 hours (depending on your model).
1.Load the washer and fill the dispensers.
2.Close the washer lid.
3.Press POWER.
4.Select the desired Cycle, Modifiers and Options.
5.Press DELAY START. 1H (one hour) will be displayed in the time display window. The indicator light for Delay Start will flash.
Wash/Rinse Temp
Select a water temperature based on the type of load you are washing. Use the warmest wash water safe for fabrics. Follow garment label instructions.
Warm rinses leave the loads drier and more comfortable to handle. However, warm rinses may increase wrinkling. Cold rinses may help with wrinkling and save energy.
6.For a longer delay time, press Delay Start. The Start time will increase by
7.Press START. The countdown to the wash cycle will show in the time display window, and the Delay Start indicator light will glow.
NOTE: You must press Start to initiate a countdown for the cycle to begin.
To change the Delay Start time:
■Press STOP.
■Press DELAY START to select the desired delay time.
■Press START to begin the countdown.
To cancel Delay Start:
Press START again to begin the cycle right away, or press STOP twice to cancel the cycle.
17
