4.Using pliers, tighten the coupling with an additional two-thirds turn.

NOTE: Do not overtighten or use tape or sealants on the valve. Damage to the valves can result.

HOT COLD

5.Attach the cold water hose to the inlet valve labeled cold.

6.Screw on coupling by hand until it is seated on the washer.

7.Using pliers, tighten the coupling with an additional two-thirds turn.

NOTE: Do not overtighten or use tape or sealants on the valve. Damage to the valves can result.

Check for leaks

■Turn on the water faucets and check for leaks. A small amount of water might enter the washer. You will drain this in a later step.

NOTE: Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Record hose installation or replacement dates for future reference.

■If you connect only one water hose, you must cap off the remaining water inlet port.

■Periodically inspect and replace hoses if bulges, kinks, cuts, wear, or leaks are found.

Secure the Drain Hose

1.Drape the power cord over the console.

2.Remove any cardboard used to move washer.

Beaded tie strap

3.Fasten the drain hose to the laundry tub leg or drain standpipe with the beaded tie strap. See view A or B.

ABC

If the washer faucets and the drain standpipe are recessed, put the formed end of the drain hose into the standpipe. Tightly wrap the tie strap around the water inlet hoses and the drain hose. See view C.

Level the Washer

WARNING

Excessive Weight Hazard

Use two or more people to move and install washer. Failure to do so can result in back or other injury.

One washer foot has been installed at a different height on your new washer. The other three feet were preset at the factory. Properly leveling your washer will minimize noise and vibration.

1.Slide the washer to its final location.

2.Push on upper front panel to be sure the washer is on its rear feet.

10

Page 9 Page 11
Page 10
Image 10
Kenmore 2709, 2708, 2707, 110.2706 manual Secure the Drain Hose, Level the Washer, Check for leaks
Page 9 Page 11

2707, 2708, 2709, 110.2706 specifications

The Kenmore 110.2706, 2709, 2708, and 2707 washing machines are a part of the brand's well-regarded lineup, known for their reliability and performance. These models cater to a variety of laundry needs, making them popular choices among homeowners.

One of the standout features of these washers is their capacity. With a focus on accommodating larger loads, they enable users to tackle hefty laundry days with ease. This not only translates to fewer cycles but also saves time and energy, making them ideal for busy households or those with larger families.

The Kenmore 110 series is equipped with a range of wash cycles and options, allowing for customization based on fabric type and soil level. From delicate fabrics to heavily soiled work clothes, users can select the appropriate cycle for optimal cleaning results. The inclusion of specialized cycles such as “Heavy Duty” and “Quick Wash” provides flexibility, ensuring that garments receive the care they require.

Technologically, the Kenmore 110.2706 to 2709 models incorporate advanced features like the Dual Action Agitator. This design helps to move clothes efficiently through the water, ensuring a thorough cleaning without causing excess wear and tear on fabrics. Additionally, the Adaptive Wash technology optimizes the wash process by detecting load size and fabric type, adjusting water levels and wash actions accordingly to deliver the best possible results.

Energy efficiency is another key characteristic of these washing machines. Kenmore has designed the 110 series to meet or exceed Energy Star® guidelines, which helps consumers save on utility bills while also being more environmentally friendly. The models utilize modern continuous temperature-control systems to maintain optimal water temperature, which enhances cleaning performance while consuming less energy.

Ease of use is paramount in the design of the Kenmore 110 washers. The intuitive control panel simplifies the selection of settings, while the large, transparent lid provides visibility into the wash cycle. Furthermore, these models often feature a sturdy build designed for durability, ensuring that they can withstand the rigors of regular use over the years.

In summary, the Kenmore 110.2706, 2709, 2708, and 2707 washing machines are equipped with features such as large capacity, multiple wash cycles, advanced agitation technology, and energy efficiency. These characteristics make them an excellent choice for anyone looking to invest in a reliable and effective laundry solution for their home.
Top Page Image Contents