Using rinse and spin
When using extra detergent for heavily soiled clothes, or washing
1.Push Cycle Control Knob in and turn clock- wise to one of the dots on the dial, as illustrated.
2.Pull Cycle Control Knob out. The washer will fill to selected load size, agitate, drain, and spin.
What happens in each cycle
When the Cycle Control Knob is set to a number and pulled out, the washer fills (with the selected water temperature) before agita- tion and timing start. The washer will begin agitating immediately after filling; agitation can occur with the washer lid up or down. After agitation starts, the knob turns clockwise until it points to OFF and the cycle ends,
The washer pauses brletly throughout each cycle. These pauses are normal for washer operation.
NOTE: If your washer drains into a laundry tub, remove lint collected in the tub or strainer.
Fill
Wash selected time
Spin
Fill
Rinse
Spin