JVC KD-MX3000 manual Specifications, FM Tuner, AM Tuner

Page 44

SPECIFICATIONS

AUDIO AMPLIFIER SECTION

Maximum Power Output: Front: 40 watts per channel Rear: 40 watts per channel

Continuous Power Output (RMS):

Front: 16 watts per channel into 4 Ω, 40 to 20,000 Hz at no more than 0.8% total harmonic distortion.

Rear: 16 watts per channel into 4 Ω, 40 to 20,000 Hz at no more than 0.8% total harmonic distortion.

Load Impedance: 4 Ω (4 to 8 Ω allowance) Tone Control Range

Bass: ±10 dB at 100 Hz

Treble:±10 dB at 10 kHz Frequency Response: 40 to 20,000 Hz Signal-to-Noise Ratio: 70 dB

Line-In Level/Impedance: 1.5 V/20 kΩ

Line-Out Level/Impedance: 2.0 V/20 kΩ load (full scale)

Output Impedance: 1 kΩ

CD PLAYER SECTION

Type: Compact disc player

Signal Detection System: Non-contact optical pickup (semiconductor laser)

Number of channels: 2 channels (stereo)

Frequency Response: 5 to 20,000 Hz

Dynamic Range: 96 dB

Signal-to-Noise Ratio: 98 dB

Wow and Flutter: Less than measurable limit

MD PLAYER SECTION

Audio Playing System: MiniDisc digital audio system

Reading System: Non-contact, semiconductor laser pickup (λ = 780 nm)

Error Correction System: CIRC (Cross

Interleave Reed-Solomon Code) Sampling Frequency: 44.1 kHz

Audio Compression System: ATRAC (Adaptive TRansform Acoustic Coding) Number of Channels: 2

Frequency Response: 5 to 20,000Hz

TUNER SECTION

Frequency Range: FM:87.5 to 107.9 MHz

(with channel interval set to 200 kHz)

87.5 to 108.0 MHz

(with channel interval set to 50 kHz) AM:530 to 1,710 kHz

(with channel interval set to 10 kHz) 531 to 1,602 kHz

(with channel interval set to 9 kHz)

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)

50 dB Quieting Sensitivity:

16.3dBf (1.8 µV/75 Ω)

Alternate Channel Selectivity (400 kHz): 65 dB

Frequency Response: 40 to 15,000 Hz

Stereo Separation: 35 dB

Capture Ratio: 1.5 dB

[AM Tuner]

Sensitivity: 20 µV

Selectivity: 35 dB

Dynamic Range: 92dB

Signal-to-Noise Ratio: 95dB

Wow And Flutter: Immeasurable

GENERAL

Power Requirement

Operating Voltage: DC 14.4 volts (11 to 16 volts allowance)

Grounding System: Negative ground Dimensions (W x H x D)

Installation Size:

182 x 52 x 165 mm

(7 - 3/16" x 2 - 1/16" x 6 - 1/2") Panel Size: 188 x 58 x 14 mm

(7 - 7/16" x 2 - 5/16" x 5/8")

Mass: 1.8 kg (4.0 lbs) (excluding accessories)

Design and specifications subject to change without notice.

US and foreign patents licensed from Dolby Laboratories Licensing Corporation.

If a kit is necessary for your car, consult your telephone directory for the nearest car audio speciality shop.

44

EN 40-44 KD-MX3000 [J]/F

44

98.10.19, 6:53 PM

Image 44
Contents KD-MX3000 InstructionsPrecautions Identification and Certification labelsImportant for Laser Products For U.S.A. only Information For U.S.AContents When this unit malfunctions or does not operate Other Main FunctionsTurn on the power Adjust the volumeAdjust the sound as you want see pages 18 Basic OperationsRadio Basic Operations Listening to the radioSelect the band FM1, FM2, FM3 or AM Start searching a stationAutomatic preset SSM Storing stations in memorySelect the band FM1, FM2, FM3 or AM you Want to store stations intoManual preset Tune into a station of 88.3 MHzTuning into a preset station Select the number 1 6 for the preset station you wantSelecting FM reception sound To change the display information while receiving a stationCD Operations Playing a CDOpen the control panel Insert a CD into the loading slotLocating a track or a particular portion on a CD To fast forward or reverse the trackTo go to the next track or the previous track To go to a particular track directlyTo play back tracks repeatedly Repeat Play Selecting CD playback modesTo play back tracks at random Random Play Prohibiting CD ejection To play back only intros Intro ScanMD Operations Playing an MDInsert an MD into the loading slot To stop play and eject the MDLocating a track or a particular portion on an MD Selecting MD playback modes Prohibiting MD ejection Indication For Preset values Sound AdjustmentsSelecting preset sound control modes Adjusting the sound Select the item you want to adjustAdjust the level Indication To do RangeStoring your own sound adjustments Call up the sound control mode you want toAdjust Repeat the same procedure to store other settingsSetting the clock Other Main FunctionsChanging the general settings PSM Select the PSM item you want to adjust seeSelect or adjust the PSM item selected above Seconds so that PSM appears on the lowerPress SEL Select when the setting is complete Turning on or off the key-touch tone Selecting the dimmer modeSelecting the level display Turning on or off the power amplifier switch Changing the AM/FM channel intervalsAdjusting the contrast level Selecting the scroll modeControlling the volume automatically Audio Cruise Mode Select Audio Cruise modeTo adjust the volume increase rate If Audio Cruise does not function correctlyAssigning names to the sources Press and hold SEL Select for more thanSeconds while pressing Disp Sources Maximum number of the charactersSelect the character set you want while is flashing Select a characterMove the cursor to the next or previous Character positionNumbers and symbols Available charactersCapital letters Small lettersHow to detach the control panel How to attach the control panelDetaching the control panel Unlock the control panelInstalling the batteries Remove the battery caseReplace the battery Return the battery caseUsing the remote controller Select the CD automatic changer CD Changer OperationsPlaying CDs To go to a particular disc directly Mode Indication Plays the beginnings 15 seconds Mode RND Indicator Plays at randomMode RPT Indicator Plays repeatedly Select the text display mode while playing a CD Playing the CD TextExternal Component Operations Turn on the connected device and start playing the sourceTaking care of CDs MaintenanceHandling Discs Periodical maintenance Taking care of MDsMoisture condensation Disc storageTroubleshooting Symptoms Causes RemediesClock setting and preset AM Tuner SpecificationsFM Tuner KD-MX

KD-MX3000 specifications

The JVC KD-MX3000 is a versatile and feature-rich car stereo designed to enhance your driving experience by integrating advanced audio technologies and user-friendly functionalities. This model stands out in the crowded market of in-car entertainment systems by providing an array of modern features while maintaining exceptional audio performance.

One of the main features of the KD-MX3000 is its compatibility with multiple audio formats. It supports MP3, WMA, and WAV files, allowing users to enjoy their favorite music from different sources, whether on CDs, USB flash drives, or through Bluetooth connections. The built-in Bluetooth technology enables hands-free calling and audio streaming from compatible devices, ensuring that drivers can stay connected without compromising their safety on the road.

The user interface of the KD-MX3000 is designed for convenience and ease of use. It features a large, clear display that provides vital information about the currently playing track, as well as the radio station. The rotary knob and well-placed buttons allow for straightforward navigation, making it easy to switch between sources or adjust settings while driving.

Another standout characteristic of this model is its audio customization capabilities. Users can tailor their listening experience with the built-in equalizer that offers multiple presets and a customizable 3-band equalizer. Additionally, the unit is equipped with high-quality amplifiers that enhance sound clarity and provide rich bass, maximizing the overall audio experience.

The KD-MX3000 also embraces modern connectivity. With multiple USB ports, users can easily connect, charge, and play music from their devices. It supports a variety of smartphone compatibility options, including Android Auto and Apple CarPlay, allowing for seamless integration of mobile apps into the car audio system.

Another technological highlight is its enhanced radio features. The KD-MX3000 supports both AM and FM bands and offers a range of presets that make it simple to store and access favorite stations. The digital signal processing provides clearer reception, reducing static and improving sound quality even in challenging environments.

In summary, the JVC KD-MX3000 combines advanced audio technologies with an intuitive interface, making it a compelling choice for anyone looking to upgrade their car audio system. With its diverse connectivity options, customization capabilities, and superior sound performance, it represents a perfect blend of functionality and modernity for today's music enthusiasts on the road.