Frigidaire 137409900A(1111) Cycle Settings For best results, Operating Instructions, sanitize

Page 9
Cycle Settings

Cycle Settings

For best results

Follow the fabric care label instructions on items to be dried.

Appropriate drying temperature, dryness level and options will automatically be displayed for each cycle. The settings can be modified before the cycle is started. Make modifications based on load size, dampness and fabric type and durability. Modifications for each cycle will be remembered and recalled each time that cycle is selected in the future.

To return to factory settings, press these two buttons at the same time and hold until the signal sounds.

If changes are attempted after the cycle starts, the lights will flash and a signal will beep, but the cycle will continue.

NOTE

To change the settings once the cycle has begun, push in the cycle selector knob to pause the cycle, make the new selections and push in the selector knob again to restart the dryer.

Drying Temperature

To change the preset temperature, press the temp button to scroll to the desired setting.

To protect your fabrics, not all temperatures are available with every cycle.

The temperature selected for the cycle will be remembered and recalled each time that cycle is selected in the future.

OPERATING INSTRUCTIONS

sanitize

Recommended for durable fabrics and towels. Use this selection to remove harmful bacteria from your clothing or other items where sanitization is desired.

This option will kill 99.9% of bacteria with no carryover of bacteria between loads. A higher temperatures is required. Please check fabric care labels to prevent damage.

NOTE

Only sanitizing cycles have been designed to meet the requirements of NSF P154 protocol for sanitization efficacy.

NSF Protocol P154

Sanitization Performance of

Residential Clothes Dryers

high

Recommended for most cotton fabrics.

normal

Recommended for wrinkle free, easy care, lightweight fabrics and bulky loads.

low

Recommended for delicate fabrics.

air dry

This setting (no heat) can only be selected with a timed cycle. The air dry setting tumbles the load without heat. Use this setting to dry items containing feathers, down, foam rubber, plastics or rubber-like materials; to refresh clothing, stuffed animal, pillows or blankets; and to dust draperies.

Dryness Level (Auto Dry)

To change the preset level, press the dryness level button to scroll to the degree of dryness desired.

To protect your fabrics, not all dryness levels are available with every cycle. If a dryness level is not appropriate for the cycle, it cannot be selected.

The dryness level selected for the cycle will be remembered and recalled each time that cycle is selected in the future.

Select the normal dry level for most Auto Dry cycles.

Occasionally a load may seem too damp or over-dried at the end of the cycle. To increase drying time for similar loads in the future, select high. For loads requiring less drying time, select low.

Select damp for items you wish to partially dry before hanging or ironing.

9

Image 9
Contents Care and Cleaning WarrantyUse &Care All about theRecognize safety symbols, words and labels IMPORTANT SAFETY INSTRUCTIONSDefinitions Product Record240 v Electric Dryer WARNING - RISK OF FIREPREVENT FIRE FIRE HAZARDPROTECT CHILDREN PREVENT INJURYPREVENT INJURY AND DAMAGE TO THE DRYER Normal Operating Sounds OPERATING INSTRUCTIONSOperating Your Dryer A D C B2 Check that the lint filter is clean and in place Operating Your Dryer, continued4 Select the appropriate cycle and settings for each load 6 When the cycle ends, remove items immedi- ately and hang or foldFor best results Cycle SelectionAuto Dry Cycles 1. initialcasual Cycle Selection, continuednormal heavy dutyDrying Temperature Cycle Settings For best resultssanitize highenergy saver Cycle Optionswrinkle release shrink guard= Cycle defaults Dryer Settings ChartDrying Rack on select models Other FeaturesControl Lock Estimated Time RemainingCARE AND CLEANING INSIDEOUTSIDE Common Drying Problems SOLUTIONS TO COMMON PROBLEMSSOLUTION Avoid Service ChecklistOCCURRENCE POSSIBLE CAUSEWarranty Periods MAJOR APPLIANCE WARRANTY INFORMATIONThis warranty does not cover the following IF YOU NEED SERVICE