Frigidaire FAQe7011K W/B dimensions Front Load Dryer Specifications, Optional Accessories

Page 2

Front Load Dryer Specifications

Product Shipping Weight (approx.) – 140 Lbs.

An electrical supply with grounded three-prong receptacle is required.

Voltage Rating – 240V / 60 Hz / 30 Amps

Single phase 3- or 4-wire cable, 240 Volt, 60 Hertz AC only electrical supply with ground required on separate circuit fused on both sides of line. (Do not use same circuit as washer.)

Connected Load (kW Rating) @ 240 Volts = 5.0 kW

Amps @ 240 Volts = 24 Amps

Dryer MUST employ a 3-conductor NEMA 10-30 type SRDT or

4-conductor NEMA 14-30 type SRDT or ST (as required), rated at 240 volt AC minimum, 30 amp power supply cord marked for use with clothes dryers (not supplied).

Grounding through neutral link prohibited in specific applications and certain locales, requiring use of 4-wire system. (For detailed electrical requirements, refer to Product Installation Guide on web.)

Always consult local and national electric codes.

Can be installed alone, with or without optional 15" Drawer Pedestal, or stacked above matching Frigidaire® Affinity Washer, which requires installation of optional Dryer Stacking Kit. (For installation details, refer to instructions included with optional pedestal or stacking kit or on web.)

Can be built in with matching Frigidaire® Affinity Washer in under- counter, recessed or closet installation. (Refer to Built-In Installations on this page for cutout dimensions. For additional installation details, refer to Product Installation Guide on web.)

Closet installation requires vented door with 2 unobstructed louvered openings, minimum 60 sq. in. each, located 3" from top and bottom

Front Load Dryers

FAQE7011K W/B Electric

of door. Full-length 120 sq. in. opening also acceptable. Allow additional 1" clearance between fronts of units and closed door.

Do NOT install in area exposed to dripping water or outdoor weather conditions, or where gasoline or other flammables, including automobiles, are kept or stored.

Floor MUST be solid with 1" maximum slope. Do NOT install on carpeted surface.

Dryer MUST exhaust to outside of building, NOT into any concealed space.

Exhaust installation requires minimum 4"-diameter rigid or flexible metal duct with approved vent hood having swing-out damper(s). Do NOT use flexible plastic or metal foil duct and use shortest run possible.

Leveling legs supplied to level dryer properly and reduce excessive noise and vibration.

Note: For planning purposes only. Refer to Product Installation Guide on the web at frigidaire.com for detailed instructions.

Optional Accessories

Dryer Stacking Kit – (PN # 134700600).

15" Classic White Drawer Pedestal – (PN # APWD15W).

15" Classic Black Drawer Pedestal – (PN # APWD15E).

Mobile Home Installation Kit – (PN # 137067200).

Drying Rack – (PN # 137067300).

FRIGIDAIRE®

USA 250 Bobby Jones Expressway Martinez, GA 30907

1-800-FRIGIDAIRE frigidaire.com

Specifications

CANADA 5855 Terry Fox Way Mississauga, ON L5V 3E4

1-800-265-8352 frigidaire.ca

subject to change.

FAQE7011K 06/09

© 2009 Electrolux Home Products, Inc.

Printed in the U.S.A.

Image 2
Contents Save Your Settings Express-Select Controls Fits-More 7.0 Cu. Ft. Dryer DrySense TechnologyFront Load Dryer Specifications Optional Accessories

FAQe7011K W/B specifications

The Frigidaire FAQE7011K W/B is a cutting-edge appliance designed to enhance your laundry experience while maximizing efficiency and convenience. This model is a washer and dryer combo that provides a solution for households with limited space, yet still delivers powerful performance.

One of the standout features of the FAQE7011K W/B is its capacity. With a sizable drum capacity, it can handle larger loads, which means fewer cycles and more time saved doing laundry. This model is particularly suited for busy families or individuals who desire efficiency without sacrificing quality.

The FAQE7011K W/B is equipped with advanced technologies that make it a top choice in modern home appliances. The built-in inverter motor is designed to provide a quiet operation while ensuring longevity and reliability. This technology not only minimizes noise but also helps to conserve energy, making it an environmentally friendly option. Additionally, the washer features multiple wash cycles and settings, so you can customize each load based on fabric type and soil level, ensuring optimal care for all your garments.

Another significant aspect of this model is its user-friendly interface. The intuitive controls and digital display allow for easy navigation through various settings, making laundry day less of a hassle. The delay start option is particularly beneficial, as it allows users to set a wash or dry cycle to begin at a more convenient time, whether late at night or while away from home.

In terms of space saving, the compact design of the FAQE7011K W/B makes it ideal for apartments, condos, or homes with limited laundry room space. Its stackable form allows it to fit neatly in tight spaces, proving that you don’t need a large area to have powerful laundry capabilities.

Moreover, the Frigidaire FAQE7011K W/B includes advanced moisture sensing technology, which ensures clothes are dried optimally without over-drying, protecting your fabrics and reducing wear and tear.

Overall, the Frigidaire FAQE7011K W/B is a comprehensive solution for modern laundry needs, combining efficiency, technology, and thoughtful design into a compact appliance that respects both fabric care and space constraints.