GE UPSQ495GT, UPSQ495ET operating instructions Not Operate the Dryer

Page 6

Important Safety Information

Read all safety information before using

 

• Clean the lint filter before

 

each load to prevent lint

 

accumulation inside the

 

dryer or in the room. DO

 

NOT OPERATE THE DRYER

 

WITHOUT THE LINT FILTER

 

IN PLACE.

 

• Keep the area around and

 

underneath your appliances

 

free from the accumulation

 

of combustible materials,

 

such as lint, paper, rags,

 

chemicals, etc.

 

• Regularly inspect the exhaust

 

duct to be sure it has not been

 

crushed or otherwise restricted.

 

• The interior of the machine

 

and the exhaust duct

 

connection inside the dryer

 

should be cleaned periodically

 

by a qualified individual.

 

• Never reach into the dryer

 

while the drum is moving.

 

Before loading, unloading or

 

adding clothes, wait until the

 

drum has completely stopped.

 

• Do not dry fiberglass articles

 

in your dryer. Skin irritation

 

could result from the remaining

 

glass particles that may be picked

 

up by clothing during subse-

 

quent dryer uses.

 

• The laundry process can

 

reduce the flame retardancy

 

of fabrics. To avoid such a

 

result, the garment manufacturer’s

 

care instructions should be

6

followed very carefully.

•Close supervision is necessary if this appliance is used by or near children. Do not allow children to play inside, on, or with this appliance or any discarded appliance. Dispose of discarded appliances and shipping or packing materials properly. Before discarding a dryer, or removing from service, remove the door of the dryer compartment.

•Keep all laundry aids (such as detergents, bleaches, fabric softeners, etc.) out of the reach of children, preferably in a locked cabinet. Observe all warnings on container labels to avoid personal injury.

•Keep the floor around your appliances clean and dry to reduce the possibility of slipping.

•To minimize the possibility of electric shock, unplug this appliance from the power supply or disconnect the dryer at the household distribution panel by removing the fuse or switching off the circuit breaker before attempting any maintenance or cleaning (except the removal and cleaning of the lint filter).

•NOTE: Turning the Cycle Selector knob to an OFF position does NOT disconnect the appliance from the power supply.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Controls on Your Dryer Other Dryer Features Specialized Fabric Guide Loading Suggestions Care of ProductStart Here 800.626.2000Welcome Need Help?Read all safety information before using Important Safety InformationSafety Precautions Page Not Operate the Dryer Page Operating Instructions Cycle DescriptionsReset Options Other dryer features your model hasSignal Extra CareDrum Lamp Drying RackDrying rack must be used with the Timed Cycle Reversing the Door Specialty Care Guide Helpful InformationSuggested Care Loading SortingLoading Hints Exterior Care & CleaningInterior Lint FilterExhaust Duct Exhaust HoodDryer Doesn’t Heat Before you call for serviceIf Something Goes Wrong Greasy Spots on ClothesStatic Occurs Clothes Take Too Long to DryClothes Shrink Clothes are WrinkledVenting the Dryer Correct Venting Incorrect VentingVenting must conform to local building codes Page We’ll be there GE Service NumbersIn-Home Repair Service GE Answer CenterParts and Accessories Service ContractsFurther Service United StatesPage Sécheuse Besoin d’aide? BienvenueAllez-y Agrafez votre reçu à l’intérieur de laVeuillez d’abord lire les mesures de sécurité Mesures de sécurité importantesMise en garde Mesures de sécuritéPage Veuillez d’abord lire les mesures de sécurité Conservez CES Directives Commandes De votre SécheuseDirectives de fonctionnement Description des programmes Soins Plus Autres caractéristiques possibles sur votre modèleDirectives de fonctionnement Annulation des optionsLampe du tambour Grille de séchage Outils nécessaires Tournevis Phillips n 2 standard Pinces à bec longGuide d’entretien des tissus Renseignements utilesArticle Entretien suggéré Chargement TriConseils pour le chargement Extérieur Entretien et nettoyageIntérieur Filtre à charpieConduit d’évacuation Évent muralPas en marche Avant d’appeler un réparateurLorsqu’un problème survient Charpie sur les vêtementsÉlectricité statique De temps à sécherLes vêtements prennent trop Les vêtements rétrécissent Les vêtements sont froissésTaches de graisse sur les vêtements CorrectifsÉvacuation de la sécheuse Évacuation correcte Évacuation incorrectePage Nous serons là Numéros de service GEService de réparation à domicile Si vous avez des besoins particuliersContrats d’entretien ServicePièces et accessoires Aux États-UnisCe qui n’est pas couvert Garantie DE LA SécheusePage Page Secadora Engrape su factura en la parte Ayúdenos a ayudarleBienvenido Interior de la contraportada de esteSI Huele a GAS Información importante de seguridad AdvertenciaPrecauciones de seguridad Page Información importante de seguridad Guarde Estas Instrucciones Instrucciones de operación Descripciones de ciclos Limpie el filtro para pelusa cada vez que use la secadoraDescripciones de ciclos Cuidado adicional Otras características de secado que puede tener su modeloInstrucciones de operación SeñalLuz del tambor Rejilla de secadoCómo voltear la puerta Herramientas necesariasGuía de cuidados especiales Información útilArtículo Cuidado sugerido Consejos para preparar las cargas Preparación de las cargasClasificación Separe por tipo de telaCuidado y limpieza Filtro para pelusaAlmacenamiento Tubo de escape Campana de escapeLa secadora no Antes de solicitar un servicioSi algo falla FuncionaPelusa en la ropa Se presenta estáticaLa ropa está arrugada La ropa tarda mucho en secarse Las prendas encogenQué hacer Ventilación de la secadora Ventilación correcta Ventilación incorrectaNotas Estaremos Con Usted Números de servicio de GEServicio de reparación en su hogar Partes y accesorios Contratos de servicioSi se necesita servicio Garantia DE LA Secadora Qué no está cubiertoPage Dryer Warranty What Is Not Covered

UPSQ495ET, UPSQ495GT specifications

The GE UPSQ495GT and UPSQ495ET are advanced uninterruptible power supply (UPS) systems designed to provide reliable power protection for critical applications. These robust systems are built to ensure the continuous operation of sensitive equipment in various industries, including telecommunications, data centers, healthcare, and manufacturing.

One of the main features of the GE UPSQ495GT and UPSQ495ET is their high-efficiency design, which allows them to deliver optimal power performance while minimizing energy consumption. The UPS systems boast a high online efficiency rating, which translates into lower operating costs and a reduced environmental footprint. By utilizing advanced technologies, these UPS systems can operate effectively in both double-conversion and eco-mode, offering flexibility for different power protection needs.

Another significant characteristic of these UPS units is their scalability. The UPSQ495 series can be easily expanded to accommodate growing power requirements, making them ideal for businesses anticipating future changes in load demands. By supporting parallel configurations, various units can operate in tandem, thereby enhancing total capacity while ensuring redundancy for critical loads.

The systems are equipped with a user-friendly interface, featuring an LCD display that provides real-time monitoring and status updates. Users can easily track critical metrics such as input and output voltage, battery health, and load levels, which facilitate proactive maintenance and operational visibility.

Moreover, the UPSQ495GT and UPSQ495ET incorporate advanced battery management technology, which optimizes battery performance, prolongs life, and ensures reliable backup during power interruptions. The intelligent battery management system continuously monitors and adjusts charging parameters, helping to minimize battery failure and extend service intervals.

Safety is also a priority in the design of these UPS systems. They include multiple protection features such as overload protection, short-circuit protection, and thermal protection to safeguard the equipment and connected loads.

In summary, the GE UPSQ495GT and UPSQ495ET are engineered to provide high-efficiency, scalable, and user-friendly power protection solutions ideal for critical applications. With their advanced features and technologies, these UPS systems deliver reliability and performance, ensuring that essential operations remain uninterrupted even in the face of power disturbances.
Top Page Image Contents