11. Custom Programming
12. Beeper
Set up your favorite combination l] of settings and save them here
The BEEPER controls the volume of the beep that is made
0 HIGH
for
To store a CUSTOM PROGRAM.
l. Select a cycle
( }
when you press any of the buttons on the control panel and the termination of any cycle is indicated.
OLOW
2.Change DRY LEVEL and TEMP. CONTROL.
3.Select OPTIONS you want.
4.Press and hold the CUSTOM PROGRAM.
To recall your stored CUSTOM PROGRAM
Press CUSTOM PROGRAM button, then press
START/PAUSE.
Clean lint filter
Clean dm lint filter after each use and check it before use. Not cleaning or emptying the filter will increase drying time and energy consumption, therefore dryer life expectancy could be shortened after all.
-II Clean the door and its opening
1.Wipe out the
Press BEEPER to adjust the sound level or turn off the signal.
1.Open the door and pull the filter straight up
2.Clean the filter using one of following
_) Run the fingers across the filter
BEEPER
ways in cases.
door opening. Otherwises,
2.Clean the
transparent glass door to keep inside view clear througth the glass.
(_ Vaccum the lint filter
(_ Wash the lint screen in
warm,soapy
water.
Dry thoroughly and replace.
28