Fisher & Paykel NZ AU Installation options, Free standing, Plinth, Upright wall mounting

Page 7

Installation options

5

Important!

The dryer must be installed in a suitable location.

Do not install the dryer behind a lockable door, sliding door, or behind a door where the hinge is on the opposite side to that of the dryer door. Ensure the dryer door can always be opened fully.

There are several different ways you can install your dryer.

Fig. 1 Free standing

1. Free standing

The dryer stands on the floor and can easily be moved into position.

2. Plinth*

Electronic and Auto-timer 4.5 kg only

A plinth, with adjustable feet, allows the dryer to be:

matched in height to your washer.

installed under a bench.

115 mm

Fig. 2 Plinth height

Plinths can be purchased from your dealer.

115 mm Plinth

Part No. 94832

60 mm Plinth

Part No. 94852

3. Upright wall mounting*

All models

The wall mounting kit allows the dryer to be installed at any desired height minimising the amount of bending and stretching.

Wall Mounting Kit Part No. 502067

Fig. 3 Upright wall mounting

4. Inverted wall mounting*

All models

A wall mounting kit and inverted panel allows you to install the dryer above the washer or tub.

Electronic Inverted Panel

Part No. 427776

Wall Mounting Kit

Part No. 502067

* Contact your dealer for assistance with plinths,

inversion kits and wall mounting kits

** Washer sizes. Compact: 560 x 560 mm,

Medium: 600 x 600 mm, Large: 650 x 650 mm.

for Min. =dryer clearancemm860

Washer** Compact = 435 mm Medium = 475 mm

Large = 525 mm

Minimum

lid clearance

Fig. 4 Inverted wall mounting

Image 7
Contents Installation instructions and user guide Page Contents Introduction Before using your dryerCost to dry Dryer use Safety and warningsSpontaneous combustion LintUpright wall mounting Installation optionsFree standing PlinthExternal venting Installation Electronic and Auto-timer 4.5 kg dryersVenting duct Flush ventingMovable venting Window ventingDirectional outlet grill Installation Auto-timer 3.5 kg dryerSpecifications Dryer positionTools and parts required Dryer wall mounting instructionsExtra tools and parts for mounting onto a concrete wall Floor To reduce creasing Before you drySorting and loading Drying timesElectronic and Auto-timer 4.5 kg dryers Cleaning the lint filterAuto-timer 3.5 kg dryer Airing / Cool down Using your dryerElectronic dryer Dryness levelsDrum reversal Hour settingPausing the dryer Key LockDelay start Temperature settingsWrinkle free Drying cycles Auto-timer dryerLoad comparison Approximate drying times Drying rack How to use the drying rackKg dryers only Dryer is taking a long time to dry Operating problemsClothes are still damp Pressing START/PAUSE does not start the Electronic dryerPlease keep this User Guide in a safe place Manufacturers warrantyThis warranty does not cover Fisher & Paykel undertakes toProduct details Customer careNew Zealand if you need assistance Australia if you need assistanceCopyright Fisher & Paykel 2007. All rights reserved Header