Fisher & Paykel AD55, ED56, AD39 installation instructions Safety and warnings, Dryer use, Lint

Page 5

Safety and warnings

3

WARNING!

Fire Hazard

Only dry fabrics that have been washed with water.

Do not use heat to dry articles containing foam rubber or similarly textured rubber-like materials. Dry on Airing.

A clothes dryer produces combustible lint and must be exhausted outdoors.

Take care to prevent the accumulation of lint around the exhaust opening and surrounding area.

Failure to follow these instructions can result in death or personal injury.

Dryer use

The tumble dryer is intended only for drying textile material washed in water. Undergarments that contain metal reinforcements should not be placed in the dryer. Damage to the dryer can result if the metal reinforcements come loose during drying. If you wish to dry these items use a drying rack.

Never dry rubber articles, fibreglass, or any plastic items or film eg plastic lined tablecloths and baby bibs.

Clothes should go through the cool down/airing phase of the cycle. If for any reason the dryer is stopped before the cycle has finished, dry clothes should be removed immediately and not left in the dryer.

Clothes should be spread out to cool and not left bunched up eg in a clothes basket.

This dryer has been designed for domestic use only, not for commercial applications, such as massage/beauty clinics where there may be increased lint accumulation or flammable materials in the atmosphere or load.

This dryer is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure they do not play with the dryer.

Important!

If you are using an extension cord or a portable electrical outlet device (eg multi-socket outlet box), ensure that it is positioned so that it does not come into contact with water or moisture.

Lint

Accumulated lint in the dryer can become a fire hazard, it also reduces the efficiency of the dryer by causing longer drying times and increased power consumption.

Clean the lint filter before every load.

Ensure the area around the dryer is clear of lint.

At regular intervals have the interior of the dryer cleaned of any accumulated lint. This must be done by a qualified person for electrical safety.

If you change the mounting of the dryer from upright to inverted or vice versa, the dryer must be cleaned internally by a serviceman.

Image 5
Contents Installation instructions and user guide Page Contents Cost to dry Before using your dryerIntroduction Lint Safety and warningsDryer use Spontaneous combustion Free standing Installation optionsPlinth Upright wall mountingExternal venting Installation Electronic and Manual 4.5 kg dryersMovable venting Flush ventingWindow venting Venting ductDirectional outlet grill Installation Manual 3.5 kg dryerDryer position Extra tools and parts for mounting onto a concrete wall Dryer wall mounting instructionsTools and parts required Wall mounting instructions Before drying Sorting and loadingDrying times To reduce creasingManual 3.5 kg dryers Cleaning the lint filterElectronic and Manual 4.5 kg dryers Electronic dryer Using your dryerDryness levels Airing / Cool downPausing the dryer Hour settingKey Lock Drum reversalWrinkle guard Temperature settingsDelay start Drying cycles Manual dryersLoad comparison Approximate drying times Kg dryers only How to use the drying rackDrying rack Operating problems This warranty does not cover Manufacturers warrantyFisher & Paykel undertakes to Please keep this User Guide in a safe placeNew Zealand if you need assistance Customer careAustralia if you need assistance Product detailsCopyright Fisher & Paykel 2006. All rights reserved Header