Installation – Electronic and Manual 4.5 kg dryers 
Flush venting
The dryer is vented through a hole in the wall, using a galvanised metal pipe or flexible hose. This is suitable for floor and wall mounted dryers installed against an outside wall.
Flexible Hose 400 mm | Part No. 460754 |
Fig. 6 Flush venting
7
Movable venting
The dryer is vented using a flexible hose through a hole in the wall. This allows the dryer to be moved from the wall slightly. Suitable for floor mounted dryers only.
Flexible Hose 2 m Part No. 503858
Window venting
A flexible hose is used to vent the dryer through a window. Maximum hose length is 2 metres.
Flexible Hose 2 m | Part No. 503858 |
Venting duct
The dryer is vented using an extendible duct that allows venting to a window or through an existing wall vent. The duct can be used with a flexible hose. Specially suitable for
inverted dryers. |
|
Venting Duct Kit | Part No. 460886 |
Flexible Hose 2 m | Part No. 503858 |
Fig. 7 Movable venting
Fig. 8 Venting duct
Internal venting
Included with the dryer is a vent deflector. This screws on to the back of the dryer over the exhaust outlet. If external venting is not possible the deflector must be fitted. The outlet of the vent deflector must be clear of any obstructions to ensure normal and safe operation.