Electrolux LAVATHERM 37700 operating instructions Erection and connection

Page 7

Important Safety Information

Erection and connection

•Please follow the separate Installation and connection instructions. If necessary get some advice from your local chimney sweep or building authorities.

•If the tumble drier has to be carried, first remove the base strip!

•Check the tumble drier fortransport damages. Under no circumstances should you connect a damaged appliance! Please contact your supplier in the event of damages.

•Do not install the tumble drier in rooms which are in danger of freezing!

•Install the tumble drier level!

•When installed next to a gas, coal or electric heater: a heat insulating, non-flammable board must be inserted (dimensions: 85x57.5 cm).

•The plug of the appliance must be freely accessible after installation.

•The outgoing air from the tumble drier may not be led into a smoke or chimney flute.

•Do not lead the outgoing air into a shaft which serves to ventilate rooms in which heating is installed.

•Do not install the tumble drier in a room in which heaters with coal and oil connected to a chimney are located in which the under pressure is 0.04mbar or more.

•Provide sufficient ventilation to avoid underpressure from forming.

•In accordance with the technical connection conditions of the power utilities, a permanent connection to the power supply may only be made by an authorised electrician.

•The dryer sucks in air. You should therefore keep the area around the appliance clean and also not store any flammable items that may be sucked into the appliance (e.g. cat litter, shavings) in front of it. There is risk of fire!

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Lavatherm Dear customer Before using the appliance for the first time Content Content General safety Important Safety InformationUtilisation in accordance with the intended purpose Safety of childrenErection and connection General Information Packaging DisposalDrying cycle Environmental protection tipsFill weight Duration Power Drying program Multi-display for displaying Chief features of your applianceFront view Description of the applianceControl panel Program selector positions Before using the appliance for the first timeBrief operating instructions Load the laundry DryingPrepare the laundry Open the doorAudible Signal button Start the drying program Start time pre-selectionRemoving the laundry Removing laundry or loading laundry when necessarySwitch-off the dryer End of the drying processClean the fluff filter Program Laundry Type Examples for Program tablesTime programs Care symbols &, 1, % loads less than 1kg Small glossary of textile information Care symbolsCleaning the panel and operating parts Cleaning and maintenanceCleaning the filter area Cleaning the drumSomething not working? Symptom Possible cause SolutionOFF Replace the interior light Door Reversal Instructions Door Reversal Instructions Purpose Execution Programming possibilitiesStacking kit Special accessoriesPower supply Technical dataInformation for the electrician Acrylate Acrylic Anorak IndexWhen do you incur costs even during the warranty period? Service
Top Page Image Contents