Something not working?
Symptom | Possible cause | Solution | |
| Is the tumble dryer | Plug in the tumble dryer | |
| plugged in | ||
|
| ||
The drum illumination does | The program selector is in | Turn the program selector | |
not work | |||
the OFF position | dial to LIGHT | ||
| |||
| The bulb needs replacing | Replace bulb | |
The drying process takes | The condenser unit is | Clean the condenser unit | |
covered with fluff | |||
| |||
unusually long | Fluff filter is clogged | Clean the fluff filter | |
| |||
| Fluff filter has not been | Replace the fluff filter | |
The door cannot be closed | inserted correctly and/or | and ensure the filter lid is | |
| the filter lid not closed | closed | |
Display EMPTY WATER is lit | Condensate container full | Empty the condensate | |
container | |||
|
| With the container pulled | |
EMPTY WATER indicator illu- | Foreign bodies, e. g. ani- | out, switch on the | |
mal hairs, can block the | appliance momentarily. | ||
minated, even though the | |||
inlet nozzle as well as the | The blockage can be | ||
container has already been | |||
valve on the end of the | removed from the contai- | ||
emptied | |||
EMPTY WATER container | ner shaft or the hair clea- | ||
| |||
|
| ned out of the valve | |
|
|
|
If after these checks, the tumble dryer still does not work, contact your local AEG Service Force Centre.
Please note that it will be necessary to provide proof of purchase for any
26