Gas Dryer Specifications

Gas Front Load Dryers

EIMGD55I RR/MB/IW

•Product Weight – 130 Lbs.

•An electrical supply with grounded three-prong receptacle is required. The power supply circuit must be installed in accordance with current edition of National Electrical Code (ANSI/NFPA 70) and local codes & ordinances. (Do not use same circuit as washer.)

•Voltage Rating – 120V/60Hz/15 Amps

•Amps @120 Volts = 9 Amps

•Connected Load (kW Rating) @120 Volts = 1.1kW

•Equipped with 120V 3-wire power supply cord, approx. 60" long.

•Always consult local and national electric, gas & plumbing codes.

•Can be installed alone, with or without optional 15" drawer pedestal, or stacked above matching Electrolux Washer, which requires installation of optional dryer stacking kit. (For installation details, refer to instructions included with optional pedestal or stacking kit or on web.)

•Can be built in with matching Electrolux Washer in under-counter, recessed or closet installation. Installations requiring countertop and/or cabinetry will require custom building. (Refer to Built-In Installations on this page for cutout dimensions. For additional installation details, refer to Product Installation Guide on web.)

•Closet installation requires vented door with 2 unobstructed louvered openings, minimum 60 sq. in. each, located 3" from top and bottom of door. Full-length120 sq. in. opening also acceptable. Allow 1" clearance between door and fronts of units.

•Do NOT install in area exposed to dripping water or outdoor weather conditions, or where gasoline or other flammables, including automobiles, are kept or stored.

•Floor MUST be solid with 1" maximum slope. To ensure vibration or movement does not occur, reinforcement of floor may be necessary. Do NOT install on carpeted surface.

•Dryer MUST exhaust to outside of building, NOT into any concealed space.

•Dryer equipped for 4-way venting and approved for up to 125-foot- equivalent of duct length, determined by length of run and number of elbows needed.

•Exhaust installation requires minimum 4"-diameter rigid or flexible metal duct with approved vent hood having swing-out damper(s). Do NOT use flexible plastic or metal foil duct and use shortest run possible.

•Gas supply line should be 1/2" pipe and MUST have individual shutoff valve.

•Leveling legs supplied to level dryer properly and reduce excessive noise and vibration.

•Water inlet hose for steam setting connects to cold water supply with

“Y” connector and requires 3/4" clearance between back of unit and wall.

Note: For planning purposes only. Refer to Product Installation Guide on the web at electroluxappliances.com for detailed instructions.

Optional Accessories

•Drawer Pedestals – Red Hot Red (PN# EPWD15RR),

Mediterranean Blue (PN# EPWD15MB), Island White (PN# EPWD15IW).

•Dryer Stacking Kit – (PN# ESTACKIT).

•Mobile Home Installation Kit – (PN# 137067200).

•LP Gas Conversion Kit – (PN# PCK4300).

Electrolux Major Appliances, N.A.

	USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-877-4electrolux (1-877-435-3287) • electroluxappliances.com	High standards of quality at Electrolux Home Products, Inc. mean
		we are constantly working to improve our products. We reserve the right
	CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxappliances.ca
		to change specifications or discontinue models without notice.

EIMGD55I 04/11

Printed in the U.S.A.

EIMGD55I RR/MB/IW specifications

The Electrolux EIMGD55I RR/MB/IW is a high-performance tumble dryer designed to meet the needs of today’s households while ensuring energy efficiency and exceptional drying results. This model has garnered attention for its advanced features and user-friendly design, making it a preferred choice for many.

At the heart of the Electrolux EIMGD55I is its innovative sensor drying technology. This feature automatically detects the moisture level in the fabric and adjusts the drying time accordingly. This not only ensures that clothes are dried to perfection but also helps prevent overdrying, which can damage fabrics and lead to increased energy consumption.

The dryer boasts a generous capacity, allowing users to dry larger loads, which is particularly useful for families or those who prefer to do laundry less often. The efficient drum design helps to tumble clothes evenly, resulting in reduced wrinkling and ensuring a thorough drying process.

One of the standout characteristics of the EIMGD55I is its energy efficiency. With an A++ rating, this model is designed to use less energy without compromising on performance. This not only helps to lower utility bills but also makes it an environmentally friendly option for the eco-conscious consumer.

The appliance is equipped with multiple drying programs, tailored to different fabric types and laundry needs. Whether you’re drying delicate garments, heavy cottons, or mixed fabrics, the EIMGD55I has a setting to suit each requirement. Users can easily select their desired program via the intuitive control panel, which is designed for simplicity and ease of use.

In terms of design, the Electrolux EIMGD55I RR/MB/IW features a modern, sleek appearance that fits seamlessly into any laundry room. Its compact size ensures it can be placed conveniently, even in smaller spaces. Additionally, the appliance has been engineered with noise reduction technology, making it quieter during operation compared to traditional dryers.

Another appealing feature is the anti-creasing function, which helps to minimize wrinkles in clothes after the drying cycle is complete. This is especially beneficial for those who want to reduce ironing time.

Overall, the Electrolux EIMGD55I RR/MB/IW combines efficiency, advanced technology, and thoughtful design to provide an exceptional drying experience. Its blend of practicality and performance makes it a worthwhile investment for any household seeking reliable and effective laundry solutions.